|
[Sponsors] |
December 9, 2007, 07:55 |
Sofware for spray simulation
|
#1 |
Guest
Posts: n/a
|
Hallo all experts,
I'm facing a project about simulating spray and consequent collision on solid substrate. I only have experience with the microfluid solver from CoventorWare, and heard about that ANSYS also offer certain package for CFD. Could anyone of you give some hints on this simulation, so that I could correctly start with? Except Navier-Stokes equations, is there any other sophisticated theory on this issue? Is there any open project on this topic? Thanks a lot in advance, Joe |
|
December 9, 2007, 14:37 |
Re: Sofware for spray simulation
|
#2 |
Guest
Posts: n/a
|
The KIVA family of codes developed at the Los Alamos National Lab - and used at several universities - has a spray model included. This of course is used for fuel injection simulation within the IC engine simulations that KIVA was developed for.
|
|
December 9, 2007, 17:26 |
Re: Sofware for spray simulation
|
#3 |
Guest
Posts: n/a
|
Hi Joe,
It sounds like you are modelling a coating spray technology. I am also doing some modelling in that field for my PhD. SHuo. |
|
December 10, 2007, 17:07 |
Re: Sofware for spray simulation
|
#4 |
Guest
Posts: n/a
|
Hi
If you are looking at spray simulation in commercial codes then you should look at all your options, I have used STAR-CD a lot and it is used very widely for engine spray apps and I believe it is the only of the commercial codes that allows volume fractions up to 40% |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Why my simulation not agree with the wind tunnel experiment | zhaowei | CFX | 4 | July 11, 2015 04:36 |
Solar Radiation in OpenFOAM | plainstyle | OpenFOAM Running, Solving & CFD | 15 | July 8, 2014 05:43 |
Axial fan simulation in UG/NX 7.5 | fan123 | Main CFD Forum | 2 | April 23, 2011 09:22 |
Simulation of a complex wing in solidworks flow simulation | niels1900 | FloEFD, FloWorks & FloTHERM | 6 | April 20, 2011 11:44 |
strange simulation error | Ralf Schmidt | FLUENT | 2 | May 4, 2007 14:02 |