editing STL file in ICEM CFD

January 20, 2007, 11:22

Hi I am using ANSYS 10.0 with ICEM CFD. I created the STL file of human vertebra and i have imported into ICEM CFD. Is there a way to modify the STL geometry ?

for example: how would make a hole to the in the geometry.

January 22, 2007, 09:34

Under the Geometry Panel - Create/Modify Surfaces - you should see some buttons for Creating/Modifying faceted surfaces. (Or it could have it's own top-level icon. You can add/remove triangles. Move triangles from one surface to another, etc.

January 20, 2007, 11:22	editing STL file in ICEM CFD	#1
shaan Guest Posts: n/a	Hi I am using ANSYS 10.0 with ICEM CFD. I created the STL file of human vertebra and i have imported into ICEM CFD. Is there a way to modify the STL geometry ? for example: how would make a hole to the in the geometry.

January 22, 2007, 09:34	Re: editing STL file in ICEM CFD	#2
myron Guest Posts: n/a	Under the Geometry Panel - Create/Modify Surfaces - you should see some buttons for Creating/Modifying faceted surfaces. (Or it could have it's own top-level icon. You can add/remove triangles. Move triangles from one surface to another, etc.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] swak4foam building problem	GGerber	OpenFOAM Community Contributions	54	April 24, 2015 17:02
pisoFoam compiling error with OF 1.7.1 on MAC OSX	Greg Givogue	OpenFOAM Programming & Development	3	March 4, 2011 18:18
Problem installing on Ubuntu 9.10 -> 'Cannot open : No such file or directory'	mfiandor	OpenFOAM Installation	2	January 25, 2010 10:50
OpenFOAM on MinGW crosscompiler hosted on Linux	allenzhao	OpenFOAM Installation	127	January 30, 2009 20:08
How is ICEM CFD mesh file format?	Seth	CFX	4	March 2, 2008 18:22