|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Jens Roued
Join Date: Jun 2009
Posts: 5
Rep Power: 17 ![]() |
Hi,
Looking for advise on selecting a Lenovo workstation mid range (limited budget). Mainly model building, meshing. some solving (primary to testing before shipping to HPC cluster) and pre/post. Openfoam and Star-ccm Current the choice seems to be between Lenovo P7 and PX:. Configurations: P7: Intel® Xeon® W7-3445 (or maybe Intel® Xeon® W7-3465X) or PX: 2 x Intel® Xeon® Gold 5416S-processor or (maybe 2x Intel® Xeon® Gold 5420 any advice on memory configuration: 4 x 32 Gb, 6x 32Gb or 8 x 32 Gb Thanks in advance. Best Roued |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Advice on workstation desktop vs workstation laptop? | apeironx | Hardware | 1 | October 1, 2021 02:05 |
Another Workstation spec questions.... | jeanhyuk | Hardware | 4 | July 10, 2018 05:37 |
Abysmal performance of 64 cores opteron based workstation for CFD | Fauster | Hardware | 8 | June 4, 2018 10:51 |
Lenovo C30 memory configuration and discussions with Lenovo | matthewe | Hardware | 3 | October 17, 2013 10:23 |
Dual cpu workstation VS 2 node cluster single cpu workstation | Verdi | Hardware | 18 | September 2, 2013 03:09 |