[ahmedna8]

i have 970 evo 256 gb
and 2x adata xpg sx8200 pro 512gb

so i asking for help

can i use 970 evo as a boot drive and put all my programs on it. and use the two sx8200 pro in raid 0 as a high speed drive for simulations on it.

i am new to this. so i dont know much
my setup is
amd epyc 7601 32 cores
8x8gb micron 2666mhz
motherboard: h11ssl

this setup is only for cfd

what is the best setup for ssd drives?
what the recommended type of raid?

thanks in advance

[flotus1]

can i use 970 evo as a boot drive and put all my programs on it. and use the two sx8200 pro in raid 0 as a high speed drive for simulations on it.

Sure, why not.
You can set up the RAID0 as a software RAID in your operating system. It's the easiest way to do it, and works fine for what you have in mind. But of course keep in mind that RAID0 is a risky way to store data. Use it only for data you can afford to lose (i.e. intermediate simulation results), and store data you can not afford to lose elsewhere, including backups.