Pressure drop in cyclone separators.

arjun3020 · February 23, 2012, 08:08

Hi all,

Could you please tell me how to find pressure drop in cyclone using CFD post or fluent?

i have pressure contour which gives highest pressure of 1005 Pa. and lowest pressure of -303 Pa.

How to find actual pressure drop in cyclone?

See the attachment of contour.

delaneyluke · February 24, 2012, 07:11

Hi Arjun,
Difference between "Area weighted average" of static pressure at Inlet and Outlet will give you your pressure drop

Regards
Luke

shk12345 · February 25, 2012, 10:25

hello
basically you have two planes in the domain i.e the inlet and the outlet

in fluent go to report data pressure absolute pressure and print the values of the pressure at the inlet and the outlet and take t he difference of the both

you are done
hope that help you

regards
shk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pressure drop in the pipe	mike.mm	FLUENT	6	February 7, 2011 11:31
Pipe Flow - Pressure Drop	Daniel L	FLOW-3D	2	December 10, 2010 05:23
Pressure Drop at entrance of a rotor-stator.	Resnick	Main CFD Forum	0	November 20, 2007 15:50
how to define pressure drop with CFX post	alex	CFX	0	September 20, 2007 18:31
what the result is negatif pressure at inlet	chong chee nan	FLUENT	0	December 29, 2001 06:13

February 24, 2012, 07:11		#2
delaneyluke Senior Member Join Date: Mar 2009 Location: Indiana, US Posts: 186 Rep Power: 17	Hi Arjun, Difference between "Area weighted average" of static pressure at Inlet and Outlet will give you your pressure drop Regards Luke

February 25, 2012, 10:25		#3
shk12345 Senior Member shoeb khan Join Date: Nov 2011 Posts: 179 Rep Power: 15	hello basically you have two planes in the domain i.e the inlet and the outlet in fluent go to report data pressure absolute pressure and print the values of the pressure at the inlet and the outlet and take t he difference of the both you are done hope that help you regards shk