to prepare a mixture of pulverised coal &air in fluent

sukhvinder singh · July 2, 2011, 02:43

hi,

i have to measure the pressure drop in pcpipes . in these pipes flowing fluid is pulverised coal & air.but in fluent we have no option for the mixture of pukverised coal &air,,,,,
please give me suggestions thats how can we create a mixture in fluent.

thnx in advance.

sansa3 · July 4, 2011, 06:02

Hello,

In your case, you should use DPM(discrete phase model). At the inlet boundary conditions, you can set the coal injections in the air flow.
Normally, coal & air flow is under combustion condition but if you don't want to reaction, you can disable the check of volumetric and surface reaction.

Anyany, the advanced tutorial related coal combutstion could be helpful to you.
I hope your work will be done well.

Ju Yong Ko.

sukhvinder singh · July 5, 2011, 01:30

hi,,

thanx dear, i will try with your suggestion,,

July 2, 2011, 02:43	to prepare a mixture of pulverised coal &air in fluent	#1
sukhvinder singh New Member sukhvinder singh Join Date: Jul 2011 Posts: 3 Rep Power: 15	hi, i have to measure the pressure drop in pcpipes . in these pipes flowing fluid is pulverised coal & air.but in fluent we have no option for the mixture of pukverised coal &air,,,,, please give me suggestions thats how can we create a mixture in fluent. thnx in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Two questions on Fluent UDF	Steven	Fluent UDF and Scheme Programming	7	March 23, 2018 04:22
Pulverised coal combustion	Anders Jungar	FLUENT	11	October 28, 2013 01:51
Different Results from Fluent 5.5 and Fluent 6.0	Rajeev Kumar Singh	FLUENT	6	December 19, 2010 12:33
Mixture Properties-auto update by Fluent?	Julie	FLUENT	1	August 23, 2002 23:40
Coal combustion with Fluent 4.5 or 5.0!	Sriram Popuri	Main CFD Forum	2	July 24, 1999 12:34

July 4, 2011, 06:02		#2
sansa3 New Member KOJUYONG Join Date: Jun 2011 Posts: 2 Rep Power: 0	Hello, In your case, you should use DPM(discrete phase model). At the inlet boundary conditions, you can set the coal injections in the air flow. Normally, coal & air flow is under combustion condition but if you don't want to reaction, you can disable the check of volumetric and surface reaction. Anyany, the advanced tutorial related coal combutstion could be helpful to you. I hope your work will be done well. Ju Yong Ko.

July 5, 2011, 01:30		#3
sukhvinder singh New Member sukhvinder singh Join Date: Jul 2011 Posts: 3 Rep Power: 15	hi,, thanx dear, i will try with your suggestion,,