energising the flow over an airfoil using synthetic jets

aerojeeva21 · March 3, 2011, 10:38

hello sir,

This is my final year project.. the main objective is to reduce the drag by installing synthetic jets in the quarter chord of the airfoil along spanwise direction..while testing it in windtunnel, the air flows over the airfoil and also a compressed air is blown into the synthetic jets so that it comes out of the airfoil, both the flows ie., flow over the airfoil and airflow from the synthetic jet mixes together.. this is called Mixed flow analysis..

How to solve this problem in fluent..? Is there any tutorial to solve mixed flow analysis..? please guide me sir..

Amir · March 3, 2011, 12:01

Hi,
you can use FLUENT to model that.
you can model realistic compressed jet or simply you can set some momentum sources on your airfoil instead if the jets flow rate are not comparable with main flow rate.

regards,

Amir

aerojeeva21 · March 4, 2011, 02:46

Thanks for ur reply sir,

i dont know how to interact both main flow and compressed jet flow in FLUENT..please tell some procedure to solve this problem..

Thank you..

Amir · March 4, 2011, 03:04

first of all you should decide about simplifications. (as I said before you can model complete or a simplified one)
for example if you want to model complete one, you can consider some inlets over airfoil that inject high pressure air with specified angle(pressure inlet B.C.) the interactions between them are FLUENT tasks and you shouldn't care about.

aerojeeva21 · March 4, 2011, 08:06

Thank u very much sir,

Need ur guidance till i complete my project...is there any tutorials for this kind of problems in FLUENT.. if so please send me sir..

Amir · March 4, 2011, 08:47

you can search airfoil with suction and/or injection modeling, you may find in internet. I didn't see your specific case in FLUENT tutorials.

regards,

Amir

March 3, 2011, 10:38	energising the flow over an airfoil using synthetic jets	#1
aerojeeva21 New Member jeevanantham Join Date: Mar 2011 Posts: 3 Rep Power: 15	hello sir, This is my final year project.. the main objective is to reduce the drag by installing synthetic jets in the quarter chord of the airfoil along spanwise direction..while testing it in windtunnel, the air flows over the airfoil and also a compressed air is blown into the synthetic jets so that it comes out of the airfoil, both the flows ie., flow over the airfoil and airflow from the synthetic jet mixes together.. this is called Mixed flow analysis.. How to solve this problem in fluent..? Is there any tutorial to solve mixed flow analysis..? please guide me sir..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flow meter Design	CD adapco Group Marketing	Siemens	3	June 21, 2011 09:33
problem in modeling flow over a 3d airfoil	guess	Main CFD Forum	8	March 20, 2010 14:54
Airfoil boundary condition	Frank	Main CFD Forum	1	April 21, 2008 19:36
Simulation of transonic flow over NACA0012 airfoil	MSc Student	Siemens	2	August 9, 2006 14:49
About the invisd flow around an airfoil	maximus	Main CFD Forum	1	July 16, 2005 16:04

March 3, 2011, 12:01		#2
Amir Senior Member Amir Join Date: May 2009 Location: Montreal, QC Posts: 735 Blog Entries: 1 Rep Power: 23	Hi, you can use FLUENT to model that. you can model realistic compressed jet or simply you can set some momentum sources on your airfoil instead if the jets flow rate are not comparable with main flow rate. regards, Amir

March 4, 2011, 02:46		#3
aerojeeva21 New Member jeevanantham Join Date: Mar 2011 Posts: 3 Rep Power: 15	Thanks for ur reply sir, i dont know how to interact both main flow and compressed jet flow in FLUENT..please tell some procedure to solve this problem.. Thank you..

March 4, 2011, 03:04		#4
Amir Senior Member Amir Join Date: May 2009 Location: Montreal, QC Posts: 735 Blog Entries: 1 Rep Power: 23	first of all you should decide about simplifications. (as I said before you can model complete or a simplified one) for example if you want to model complete one, you can consider some inlets over airfoil that inject high pressure air with specified angle(pressure inlet B.C.) the interactions between them are FLUENT tasks and you shouldn't care about.

March 4, 2011, 08:06		#5
aerojeeva21 New Member jeevanantham Join Date: Mar 2011 Posts: 3 Rep Power: 15	Thank u very much sir, Need ur guidance till i complete my project...is there any tutorials for this kind of problems in FLUENT.. if so please send me sir..

March 4, 2011, 08:47		#6
Amir Senior Member Amir Join Date: May 2009 Location: Montreal, QC Posts: 735 Blog Entries: 1 Rep Power: 23	you can search airfoil with suction and/or injection modeling, you may find in internet. I didn't see your specific case in FLUENT tutorials. regards, Amir