Urgent; parallel processing in fluent 12

Mansureh · December 27, 2010, 03:09

Hello every body
I want to do parallel processing in Fluent 12, but when I launch fluent 12 and choose parallel option, Fluent gives following error:

Loading "D:\PROGRA~1\ANSYSI~1\v120\fluent\fluent12.0.16\li b\flprim1119.dmp"
Done.

Host spawning Node 0 on machine "chemeng-db7ca10" (win64).
999999: mpt_get_dot_address: warning: chemeng-db7ca10 -> 127.0.0.1. Check your system network configuration!
999999: mpt_get_dot_address: warning: chemeng-db7ca10 -> 127.0.0.1. Check your system network configuration!
You can press CTRL+C to stop the startup process!
WARNING: No cached password or password provided.
use '-pass' or '-cache' to provide password
mpid: Cannot connect to mpirun (0.0.0.0, 1126): Unknown error
connect_mpirun failed

What should I do?

thanks for any help

skinnyfluid · January 18, 2011, 08:51

Mansureh,
which Number of Processes you setup?

abbott.hn · September 24, 2012, 05:26

Quote:

Originally Posted by Mansureh

Hello every body
I want to do parallel processing in Fluent 12, but when I launch fluent 12 and choose parallel option, Fluent gives following error:

Loading "D:\PROGRA~1\ANSYSI~1\v120\fluent\fluent12.0.16\li b\flprim1119.dmp"
Done.

Host spawning Node 0 on machine "chemeng-db7ca10" (win64).
999999: mpt_get_dot_address: warning: chemeng-db7ca10 -> 127.0.0.1. Check your system network configuration!
999999: mpt_get_dot_address: warning: chemeng-db7ca10 -> 127.0.0.1. Check your system network configuration!
You can press CTRL+C to stop the startup process!
WARNING: No cached password or password provided.
use '-pass' or '-cache' to provide password
mpid: Cannot connect to mpirun (0.0.0.0, 1126): Unknown error
connect_mpirun failed

What should I do?

thanks for any help

i have got the same problem, some guys said that this would be ok if i plug in the network line ,but what's the real reason ? should ansys fluent work at internet enviroment?

mashiro · September 24, 2012, 09:03

turn off your fire wall.

shk12345 · September 25, 2012, 12:12

Try to make a server machine and the other clients machines and then connect them in a lan.
Then install fluent om the server and install mpinch client on the client.
Then try to run it
Hope that will work.

December 27, 2010, 03:09	Urgent; parallel processing in fluent 12	#1
Mansureh New Member Join Date: Jul 2010 Posts: 22 Rep Power: 16	Hello every body I want to do parallel processing in Fluent 12, but when I launch fluent 12 and choose parallel option, Fluent gives following error: Loading "D:\PROGRA~1\ANSYSI~1\v120\fluent\fluent12.0.16\li b\flprim1119.dmp" Done. Host spawning Node 0 on machine "chemeng-db7ca10" (win64). 999999: mpt_get_dot_address: warning: chemeng-db7ca10 -> 127.0.0.1. Check your system network configuration! 999999: mpt_get_dot_address: warning: chemeng-db7ca10 -> 127.0.0.1. Check your system network configuration! You can press CTRL+C to stop the startup process! WARNING: No cached password or password provided. use '-pass' or '-cache' to provide password mpid: Cannot connect to mpirun (0.0.0.0, 1126): Unknown error connect_mpirun failed What should I do? thanks for any help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
parallel processing Fluent 6.3.26	ck3	FLUENT	6	October 30, 2013 01:44
Parallel Processing on ANSYS FLUENT 12	srr	FLUENT	2	April 16, 2011 15:16
Grid Check Fails in Parallel Processing Mode	askance	Main CFD Forum	0	October 20, 2010 11:11
Fluent Parallel Processing	Mrxlazuardin	FLUENT	2	April 28, 2010 08:36
Parallel Fluent with Mandrake	Daniel Dotta	FLUENT	1	May 19, 2005 16:30

January 18, 2011, 08:51		#2
skinnyfluid New Member NeNaD Join Date: Mar 2010 Posts: 16 Rep Power: 16	Mansureh, which Number of Processes you setup?

September 24, 2012, 09:03		#4
mashiro New Member SANDRA BENVENUTO Join Date: Apr 2012 Posts: 10 Rep Power: 14	turn off your fire wall.

September 25, 2012, 12:12		#5
shk12345 Senior Member shoeb khan Join Date: Nov 2011 Posts: 179 Rep Power: 15	Try to make a server machine and the other clients machines and then connect them in a lan. Then install fluent om the server and install mpinch client on the client. Then try to run it Hope that will work.