enquiry-how to define OH radical properties into fluent's material data base

nita · November 24, 2010, 05:27

Dear Sirs/Madams,
My case is UV+ H2O2 modeling by applying fluent.
In material data base, hydroxyl radicals are not stated. I dont know how to define its properties such as Cp, thermal conductivity...so on. Could you please advice me how to get the properties of the interesting chemical?
Moreover, many equations are generated in UV+H2O2 reactions. I dont know which equations are appropriate for the analysis.
Could you please advise me which link I should read to enhance the understanding for UV/h2O2 analysis?
thanks and best regards,

nita · December 9, 2010, 22:09

Hello,Any body, Could you please advice me? I am going to use chemicals for my Cfd-fluent model. I found that there are two reliable models; EDC and PDF transport. Which one should I choose? please, let me their pros and cons of each models. If you would like to know more details to provide advice, I will give you detals. let me hear from you as soon as possible. Thanking you in advance.

November 24, 2010, 05:27	enquiry-how to define OH radical properties into fluent's material data base	#1
nita New Member Anonymous Join Date: Nov 2010 Posts: 7 Rep Power: 16	Dear Sirs/Madams, My case is UV+ H2O2 modeling by applying fluent. In material data base, hydroxyl radicals are not stated. I dont know how to define its properties such as Cp, thermal conductivity...so on. Could you please advice me how to get the properties of the interesting chemical? Moreover, many equations are generated in UV+H2O2 reactions. I dont know which equations are appropriate for the analysis. Could you please advise me which link I should read to enhance the understanding for UV/h2O2 analysis? thanks and best regards,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Material Data Base	Ben	FLUENT	0	October 13, 2007 12:36
Two-Phase Buoyant Flow Issue	Miguel Baritto	CFX	4	August 31, 2006 13:02
How to update polyPatchbs localPoints	liu	OpenFOAM Running, Solving & CFD	6	December 30, 2005 18:27
properties data base	rahmat	FLUENT	0	August 26, 2002 02:00
Data Base Problems	Richard Harrison	CFX	1	January 11, 2001 18:44

December 9, 2010, 22:09		#2
nita New Member Anonymous Join Date: Nov 2010 Posts: 7 Rep Power: 16	Hello,Any body, Could you please advice me? I am going to use chemicals for my Cfd-fluent model. I found that there are two reliable models; EDC and PDF transport. Which one should I choose? please, let me their pros and cons of each models. If you would like to know more details to provide advice, I will give you detals. let me hear from you as soon as possible. Thanking you in advance.