Inlet velocity for particles in eulerian two phase flow -- CFD Online Discussion Forums

August 19, 2010, 03:17	Inlet velocity for particles in eulerian two phase flow	#1
pandaba New Member PP Join Date: Jul 2010 Posts: 9 Rep Power: 16	Can anybody tell me what velocity for the particle will be taken at inlet for the following parameters. Particle diameter = 0.0005m Density = 700 kg/m3 Volume fraction of particle = 0.005 Air velocity = 15 m/s Pipe dia = 0.1m Its a two phase flow of air and particles inside a pipe . when I give no slip velocity at inlet , solution is converged , but the continuity of the particles is not satisfied. Also for high values of volume fraction , there is problem in convergence. Can any body figure out the root cause. Thanks PP

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 06:21
compressible two phase flow in CFX4.4	youngan	CFX	0	July 2, 2003 00:32
Problem on boundry of two phase flow	youngan	CFX	0	June 30, 2003 03:32
UDF paraboloid velocity inlet	Ronak Shah	FLUENT	0	June 4, 2003 10:44
Terrible Mistake In Fluid Dynamics History	Abhi	Main CFD Forum	12	July 8, 2002 10:11

All times are GMT -4. The time now is 22:26.