[msth]

I got error on running parallel fluent on a cluster. I tried to run my case file by command

Fluent 3ddp -g -t8 < myinput.txt > myoutput.txt &

but getting error. This is myinput file
-------------------------------------------------
file
rc Moving30L-ke9309.cas
rd Moving30L-ke9309.dat

/solve
initialize
initialize-flow

/solve
set
time-step
0.00001

/solve
dual-time-iterate
20
20

/file
wc Moving30L-ke9329.cas
wd Moving30L-ke9329.dat

exit
yes
-----------------------

I run before my case file on my PC and I wanted to test it by 20 more time-steps.
Your help is appreciated.

Best,
Msth

[Chris D]

What is the error message?

[msth]

Dear Chris

Thanks for replying.
Actually, I used the above file as input file for my batch file. Below is the part of output file for error.

-----------------------------------------------------------------
>
/file>
/file> invalid command [read-data]

/file> auto-save/ read-case-data start-journal
binary-files? read-field-functions start-transcript
confirm-overwrite? read-journal stop-journal
define-macro read-macros stop-macro
execute-macro read-profile stop-transcript
export/ read-transient-table write-cleanup-script
import/ set-batch-options write-field-functions
read-case show-configuration write-macros

/file>
/file//solve>
/file//solve/initialize>
/file//solve/initialize> compute-defaults/ list-defaults
initialize-flow set-defaults/

/file//solve/initialize>
/file//solve/initialize//solve>
/file//solve/initialize//solve/set> invalid command [time-step]

/file//solve/initialize//solve/set> invalid command [0.00001]

/file//solve/initialize//solve/set> bc-pressure-extrapolations limiter-warnings? reporting-interval
disable-reconstruction? limits residual-verbosity
discretization-scheme/ multi-grid-amg set-controls-to-default
equations/ multi-grid-controls/ slope-limiter-set/
expert numerics surface-tension
flow-warnings? p-v-coupling under-relaxation/
gradient-scheme relaxation-method

/file//solve/initialize//solve/set>
/file//solve/initialize//solve/set//solve> invalid command [dual-time-iterate]

/file//solve/initialize//solve/set//solve> invalid command [20]

/file//solve/initialize//solve/set//solve> invalid command [20]

/file//solve/initialize//solve/set//solve> animate/ iterate patch
execute-commands/ monitors/ set/
initialize/ particle-history/

/file//solve/initialize//solve/set//solve>
/file//solve/initialize//solve/set//solve//file>
/file//solve/initialize//solve/set//solve//file>
/file//solve/initialize//solve/set//solve//file> auto-save/ read-case-data start-journal
binary-files? read-field-functions start-transcript
confirm-overwrite? read-journal stop-journal
define-macro read-macros stop-macro
execute-macro read-profile stop-transcript
export/ read-transient-table write-cleanup-script
import/ set-batch-options write-field-functions
read-case show-configuration write-macros

/file//solve/initialize//solve/set//solve//file> invalid command [exit]

/file//solve/initialize//solve/set//solve//file> invalid command [yes]

/file//solve/initialize//solve/set//solve//file>
/file//solve/initialize//solve/set//solve>
/file//solve/initialize//solve/set>
/file//solve/initialize//solve>
/file//solve/initialize>
/file//solve>
/file>
> Halting due to end of file on input.
job finished at Tue Apr 13 10:32:14 PDT 2010
----------------------------------------------------------
I can email you my batch and whole output file if you need it.