acoustic cavitation modeling

shahramn · January 2, 2010, 13:35

Hi,
I want to simulate a sono-reactor.an ultrasonic horn produces acoustic waves.propagation of the waves in the bulk of water generates cavity zones..
is fluent 6.2 is proper for this means?
will be grateful if anyone can indicate me some resources That would be helpful..
tx alot..

shahram

sharifi.fatemeh · January 3, 2010, 11:03

hi
my project is some how the same as yours
fluent software cannot produce acoustic waves in a fluid it just can simulate the waves that are produced by high velocity fluid motion.
as i know you should move one boundary to produce acoustic waves.
i did but my results are not very good.
i think you'd better take a look at "FEMLAB" software
if you have this software please inform me.

with best regards,
FATEMEH SHARIFI

shahramn · January 3, 2010, 15:49

salam.khoob hastin?
mamnoonam az javabetoon.
bale shoma dorost mifarmaiin..albate fluent ye gozine dare ke mishe to divare ye source term baraye tolide sot tarif kard vali ye kam sakhte va niaz be udf tarif kardan dare..
man khodam alan daram ba COMSOL 3.5a (FEMLAB) shabih saazi mikonam.ba COMSOL rahat mishe yek moaled sot dar bulk sayal shabih saazi kard vali man ba cavitationi ke dar asar moje soti be vojood miad moshkel daram..nemitoonam oono vasash tarif konam..

Emaile man : shahram.n4009@gmail.com
age tamayol darin ta ba komake ham rooye in masale kar konim..
bazam mamnoon az lotfetoon.
moafagho moayad bashin..
bye.

January 2, 2010, 13:35	acoustic cavitation modeling	#1
shahramn New Member shahram Join Date: Dec 2009 Posts: 6 Rep Power: 17	Hi, I want to simulate a sono-reactor.an ultrasonic horn produces acoustic waves.propagation of the waves in the bulk of water generates cavity zones.. is fluent 6.2 is proper for this means? will be grateful if anyone can indicate me some resources That would be helpful.. tx alot.. shahram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Acoustic modeling	Chris Honest	FLUENT	1	May 31, 2017 15:21
acoustic cavitation modeling with COMSOL	shahramn	COMSOL	13	March 5, 2016 09:57
Seeking help on modeling acoustic cavitation	Jun Cai	FLUENT	2	September 18, 2007 22:58
cavitation modeling and pressure distribution	arazgaldy	FLUENT	2	July 26, 2006 03:29
Level Set in Cavitation Modeling	Niklas Wikstrom	Main CFD Forum	1	September 9, 1999 14:08

January 3, 2010, 11:03		#2
sharifi.fatemeh New Member Join Date: Jul 2009 Posts: 7 Rep Power: 17	hi my project is some how the same as yours fluent software cannot produce acoustic waves in a fluid it just can simulate the waves that are produced by high velocity fluid motion. as i know you should move one boundary to produce acoustic waves. i did but my results are not very good. i think you'd better take a look at "FEMLAB" software if you have this software please inform me. with best regards, FATEMEH SHARIFI

January 3, 2010, 15:49		#3
shahramn New Member shahram Join Date: Dec 2009 Posts: 6 Rep Power: 17	salam.khoob hastin? mamnoonam az javabetoon. bale shoma dorost mifarmaiin..albate fluent ye gozine dare ke mishe to divare ye source term baraye tolide sot tarif kard vali ye kam sakhte va niaz be udf tarif kardan dare.. man khodam alan daram ba COMSOL 3.5a (FEMLAB) shabih saazi mikonam.ba COMSOL rahat mishe yek moaled sot dar bulk sayal shabih saazi kard vali man ba cavitationi ke dar asar moje soti be vojood miad moshkel daram..nemitoonam oono vasash tarif konam.. Emaile man : shahram.n4009@gmail.com age tamayol darin ta ba komake ham rooye in masale kar konim.. bazam mamnoon az lotfetoon. moafagho moayad bashin.. bye.