Fluent 12.0 is worst then Fluent 6.2

herntan · December 3, 2009, 21:05

Hi all,

Just a information sharing.
i currently upgraded to Fluent 12.0 and i try to rerun my simulation which i successfully done in Fluent 6.2.
The unsteady simulation just stop after around 8 time steps with the error message , AMG divergence - X-momentum.
I actually using the exactly same CASE file for both Fluent 12.0 and Fluent 6.2, but the Fluent 12.0 had fail to run.

I suspect Ansys had added something into Fluent 12.0 cause it not stable.

I also have some colleague using ICEPAK 12.0 and they also found error which never happen on ICEPAK 4.0. Again, its a totally same simulation.

I will suggest to stop using Fluent 12.0 for the moment.

Anyhow, just a suggestion.

herntan · December 7, 2009, 02:40

I had tired another 5 cases which i successfully run in Fluent 6.3. All case fail running in Fluent 12.0.
I grab the latest patch from Fluent 12.0.12 , try again, still fail.

I hope the latest Fluent 12.1 can solve the problem.

cfdman · December 7, 2009, 04:10

Hello herntan,

I never encountered such an error in v12. May be this problem based another things. License,operating sytem, system configurations etc... Because i runned alot of models in v12 from v11 case files.
Yesterday 12.1 version released. you can try this. May be useful

Good Luck

herntan · December 7, 2009, 04:23

Arda,

I using the same lisence as the Fluent 6.3 using.
I have no idea why this happen in Fluent 12.0.
I had tried to download 12.1 from Fluent user website, but they haven't release the software yet.
U get the 12.1 already?

Goldsstean · December 9, 2009, 04:58

Yeap,

tat's true I used 12v for my problem, it was not converging.

But for same case file on 6.3 it goes f9.

Goldstean

Process Design Engineer

herntan · December 14, 2009, 03:57

GREAT NEWS !!

I had downloaded the latest Fluent 12.1 from fluentuser.com and rerun my simulation again.
Now everything works all right.
The simulation i used to run fail in Fluent 12.0 now able to run in Fluent 12.1.

You guys can start try using Fluent 12.1. I think Ansys had fixed the bug in Fluent 12.0.

December 3, 2009, 21:05	Fluent 12.0 is worst then Fluent 6.2	#1
herntan Senior Member YH Tan Join Date: Mar 2009 Location: Malaysia Posts: 119 Rep Power: 17	Hi all, Just a information sharing. i currently upgraded to Fluent 12.0 and i try to rerun my simulation which i successfully done in Fluent 6.2. The unsteady simulation just stop after around 8 time steps with the error message , AMG divergence - X-momentum. I actually using the exactly same CASE file for both Fluent 12.0 and Fluent 6.2, but the Fluent 12.0 had fail to run. I suspect Ansys had added something into Fluent 12.0 cause it not stable. I also have some colleague using ICEPAK 12.0 and they also found error which never happen on ICEPAK 4.0. Again, its a totally same simulation. I will suggest to stop using Fluent 12.0 for the moment. Anyhow, just a suggestion. __________________ Herntan, Add Reputation if I am right

December 7, 2009, 02:40		#2
herntan Senior Member YH Tan Join Date: Mar 2009 Location: Malaysia Posts: 119 Rep Power: 17	I had tired another 5 cases which i successfully run in Fluent 6.3. All case fail running in Fluent 12.0. I grab the latest patch from Fluent 12.0.12 , try again, still fail. I hope the latest Fluent 12.1 can solve the problem. __________________ Herntan, Add Reputation if I am right

December 7, 2009, 04:23		#4
herntan Senior Member YH Tan Join Date: Mar 2009 Location: Malaysia Posts: 119 Rep Power: 17	Arda, I using the same lisence as the Fluent 6.3 using. I have no idea why this happen in Fluent 12.0. I had tried to download 12.1 from Fluent user website, but they haven't release the software yet. U get the 12.1 already? __________________ Herntan, Add Reputation if I am right

December 14, 2009, 03:57		#6
herntan Senior Member YH Tan Join Date: Mar 2009 Location: Malaysia Posts: 119 Rep Power: 17	GREAT NEWS !! I had downloaded the latest Fluent 12.1 from fluentuser.com and rerun my simulation again. Now everything works all right. The simulation i used to run fail in Fluent 12.0 now able to run in Fluent 12.1. You guys can start try using Fluent 12.1. I think Ansys had fixed the bug in Fluent 12.0. __________________ Herntan, Add Reputation if I am right

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fluent 6.2 tutorials	José Garcia	FLUENT	17	September 18, 2015 03:01
Structural force in FSI mapping Fluent 12.0	benjamon	FLUENT	1	October 24, 2011 11:32
Import MRI images to FLUENT 12.0	snudurupati	FLUENT	0	July 8, 2009 16:06
How to import mesh from ICEMCFD to Fluent 6.2	jeevan kumar	CFX	5	October 20, 2008 06:41
FLUENT 6.2 manual	lichun dong	FLUENT	1	April 24, 2006 03:12

December 7, 2009, 04:10		#3
cfdman New Member Arda Ersan Join Date: Aug 2009 Posts: 13 Rep Power: 17	Hello herntan, I never encountered such an error in v12. May be this problem based another things. License,operating sytem, system configurations etc... Because i runned alot of models in v12 from v11 case files. Yesterday 12.1 version released. you can try this. May be useful Good Luck

December 9, 2009, 04:58		#5
Goldsstean Member Amol Ramteke Join Date: May 2009 Location: Kolkata Posts: 30 Rep Power: 17	Yeap, tat's true I used 12v for my problem, it was not converging. But for same case file on 6.3 it goes f9. Goldstean Process Design Engineer