Urgent! how to plot contours without grid in the figure?

ivanbuz · November 9, 2009, 19:44

I need some contours plots by tomorrow, and I am going nuts right now.

the plots are to show z-vorticity. I know how to plot z-vorticity contours in Fluent, but I don't want grids to show in the figure. I did not select item "Draw Grid" or "Filled". How can I get rid of the grid in the figure?

Thanks a ton!

ivanbuz · November 9, 2009, 21:14

anybody can help? I have searched the whole forum, and I am trying everything I found without luck.

teguhtf · November 9, 2009, 21:27

Hello ivanbuz
To solve your problem try this step
1. open contour window
2. deselect "Filled" in contour option
3. click display
4. open your contour window again
5. select "filled"
6. Click display

I use FLUENT 6.2.16 for my example

Hope it helps
teguhtf

ivanbuz · November 9, 2009, 21:42

Teguhtf,

Thanks a lot for the reply. I tried and it did not work. did I miss anything?

after step 6, the figure is just a normal figure of filled contours. What I want is basically a plot with 20 iso-surfaces each with different iso-value and different color.

I use version 6.3.26. I am not sure if this is the reason.

teguhtf · November 9, 2009, 22:28

I'm sorry. I think you'll draw ordinary contour. For iso surface, you can see an example of annulus in
http://www.fluent.com/software/sf_me...s/tutorial.htm
Hope it helps
teguhtf

herntan · November 9, 2009, 23:00

to show the ISO surface, u will need to have rendering light turn on i think.

ivanbuz · November 9, 2009, 23:21

Teguhtf and herntan,

Thanks for being kind enough to reply!

After several hours of trying, I have found the way to do it. I will post the solution here when I get things on hand done, maybe tomorrow.

teguhtf · November 10, 2009, 00:04

You're welcome. Post it to this forum, please!!
thanks
teguh

ivanbuz · November 10, 2009, 18:36

Solution, as promised:

1. Generate a serial of iso-surfaces. Easy to do using text commands like below (this generates only 1 surface which includes 20 iso-surfaces)
===============
surface/iso-surface/z-vorticity
z-vorticity-isosurface
,
,
-2.2266e+005
-2.0817e+005
-1.9368e+005
-1.7919e+005
-1.647e+005
-1.5021e+005
-1.3572e+005
-1.2122e+005
-1.0673e+005
-92243
-77753
-63262
-48771
-34281
-19790
-5299.5
9191.1
23682
38172
52663
,
===============

2. display--contour. select the generated iso-surface, check "filled", and uncheck "global range".

3. use light to get 3D effect. use rotate to get the angle you want.

final figure will be like this

teguhtf · November 10, 2009, 19:16

Hi!!
Congratulation!!
Nice to see your simulation. By the way, can you send me .cas & .dbs file??
I wanna learn about that. here is my email huget_teguh@ymail.com
Thanks a lot
teguhtf

sairam · November 10, 2009, 22:39

hi ivan ur 3d stimulation looks gud can u tell me how did u remove de grid for counters, i had tried it but no result
and can i have ur file it looks intresting
satmuri@student.ysu.edu
thank u

herntan · November 10, 2009, 22:44

Very nice image u got... Gratz..
its pretty interesting how u create 1 surface by using 20 ISO.
I never know it can be done that way.
Thank Ivanbuz.

November 9, 2009, 19:44	Urgent! how to plot contours without grid in the figure?	#1
ivanbuz Member Ivan Join Date: May 2009 Posts: 85 Rep Power: 17	I need some contours plots by tomorrow, and I am going nuts right now. the plots are to show z-vorticity. I know how to plot z-vorticity contours in Fluent, but I don't want grids to show in the figure. I did not select item "Draw Grid" or "Filled". How can I get rid of the grid in the figure? Thanks a ton!

November 9, 2009, 21:27		#3
teguhtf Senior Member teguh hady Join Date: Aug 2009 Location: Saga, Japan Posts: 222 Rep Power: 18	Hello ivanbuz To solve your problem try this step 1. open contour window 2. deselect "Filled" in contour option 3. click display 4. open your contour window again 5. select "filled" 6. Click display I use FLUENT 6.2.16 for my example Hope it helps teguhtf Last edited by teguhtf; November 9, 2009 at 21:31. Reason: completing

November 9, 2009, 21:42		#4
ivanbuz Member Ivan Join Date: May 2009 Posts: 85 Rep Power: 17	Teguhtf, Thanks a lot for the reply. I tried and it did not work. did I miss anything? after step 6, the figure is just a normal figure of filled contours. What I want is basically a plot with 20 iso-surfaces each with different iso-value and different color. I use version 6.3.26. I am not sure if this is the reason. Last edited by ivanbuz; November 9, 2009 at 22:13.

November 9, 2009, 23:00		#6
herntan Senior Member YH Tan Join Date: Mar 2009 Location: Malaysia Posts: 119 Rep Power: 17	to show the ISO surface, u will need to have rendering light turn on i think. __________________ Herntan, Add Reputation if I am right

November 10, 2009, 22:39	nice	#11
sairam New Member sai ram Join Date: Sep 2009 Posts: 18 Rep Power: 17	hi ivan ur 3d stimulation looks gud can u tell me how did u remove de grid for counters, i had tried it but no result and can i have ur file it looks intresting satmuri@student.ysu.edu thank u

November 9, 2009, 21:14		#2
ivanbuz Member Ivan Join Date: May 2009 Posts: 85 Rep Power: 17	anybody can help? I have searched the whole forum, and I am trying everything I found without luck.

November 9, 2009, 22:28		#5
teguhtf Senior Member teguh hady Join Date: Aug 2009 Location: Saga, Japan Posts: 222 Rep Power: 18	I'm sorry. I think you'll draw ordinary contour. For iso surface, you can see an example of annulus in http://www.fluent.com/software/sf_me...s/tutorial.htm Hope it helps teguhtf

November 9, 2009, 23:21		#7
ivanbuz Member Ivan Join Date: May 2009 Posts: 85 Rep Power: 17	Teguhtf and herntan, Thanks for being kind enough to reply! After several hours of trying, I have found the way to do it. I will post the solution here when I get things on hand done, maybe tomorrow.

November 10, 2009, 00:04		#8
teguhtf Senior Member teguh hady Join Date: Aug 2009 Location: Saga, Japan Posts: 222 Rep Power: 18	You're welcome. Post it to this forum, please!! thanks teguh

November 10, 2009, 18:36		#9
ivanbuz Member Ivan Join Date: May 2009 Posts: 85 Rep Power: 17	Solution, as promised: 1. Generate a serial of iso-surfaces. Easy to do using text commands like below (this generates only 1 surface which includes 20 iso-surfaces) =============== surface/iso-surface/z-vorticity z-vorticity-isosurface , , -2.2266e+005 -2.0817e+005 -1.9368e+005 -1.7919e+005 -1.647e+005 -1.5021e+005 -1.3572e+005 -1.2122e+005 -1.0673e+005 -92243 -77753 -63262 -48771 -34281 -19790 -5299.5 9191.1 23682 38172 52663 , =============== 2. display--contour. select the generated iso-surface, check "filled", and uncheck "global range". 3. use light to get 3D effect. use rotate to get the angle you want. final figure will be like this

November 10, 2009, 19:16		#10
teguhtf Senior Member teguh hady Join Date: Aug 2009 Location: Saga, Japan Posts: 222 Rep Power: 18	Hi!! Congratulation!! Nice to see your simulation. By the way, can you send me .cas & .dbs file?? I wanna learn about that. here is my email huget_teguh@ymail.com Thanks a lot teguhtf

November 10, 2009, 22:44		#12
herntan Senior Member YH Tan Join Date: Mar 2009 Location: Malaysia Posts: 119 Rep Power: 17	Very nice image u got... Gratz.. its pretty interesting how u create 1 surface by using 20 ISO. I never know it can be done that way. Thank Ivanbuz. __________________ Herntan, Add Reputation if I am right

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
On grid independent solution for pulsatile flow	David	FLUENT	5	March 25, 2022 04:33
coloured grid lines instead of contours	Matthias	FLUENT	8	December 10, 2008 20:09
Vorticity plot in grid refinement study	CH	Main CFD Forum	3	May 22, 2007 13:35
Combustion Convergence problems	Art Stretton	Phoenics	5	April 2, 2002 06:59
Grid Independent Solution	Chuck Leakeas	Main CFD Forum	2	May 26, 2000 12:18