[vishwa]

Hi,
i am running a LES simulation on a 3d model and I want to save data on just one plane like every 25 timesteps.

how do i accomplish this.

This is whatt i think should be done
solve/execute-commands

and i ahve defined a name for the command and the interval as 25 and picked time-steps and in the command field, i must enter file/export/tecplot.....

If what I am thinking is correct, where do i put this line in my batch file..here is the batch file that I am using

rc /home/vishwa/vishwa/LES/Version8/LES_RE1003_MESH_INLET_MODIFIED.cas


rd /home/vishwa/vishwa/LES/Version8/LES_RE1003_MESH_INLET_MODIFIED.dat
/file/auto-save/root-name
LES_RE1003_MESH_INLET_MODIFIED
/file/auto-save/data-frequency 200
/file/auto-save/append-file-name-with/flow-time
3
/solve/set/data-sampling yes 25 no no
/solve/initialize/init-flow-statistics
/solve/set/time-step 0.00002
/solve/set/reporting-interval 2
/solve/dual-time-iterate 20000 50

wcd /home/vishwa/vishwa/LES/Version8/LES_RE1003_MESH_INLET_MODIFIED.cas


exit