[gholamghar]

hello
i downloaded files of this tutorial from fluent.com but they are compatible with 6.3.28 and my solver is 6.3.21,could anybody please send me files of this tutorial(Simulation of Wave Generation in a Tank) that are older and are compatible with 6.3.21?
thanks

[paka]

Why do you say they are incompatible with 6.3 version? As the tutorial was made for 6.2, and as far as I remember I did it with the same version of fluent.

[gajre2005]

hi
i have this problem too
the error said its for fluent 6.3.28
i have 6.3.26

[diehard_rd]

even i am facing the same problem. can someone please help out.

[teguhtf]

I've the same problem of yours!!
I think the simulation of wave generation in tank compatible for 6.3 version only. and it can run by 6.3.26. Ver 6.3.21 is demo version.
because i cannot find the 6.3.28 program on the net.
I have heard that the latest ver of FLUENT 12. Maybe it can work on this too!!

[diehard_rd]

I am currently using ver 6.3.26 but it doesnt work in it. I guess it works only on 6.3.28 . A kind request to all the masters, to kindly design and create a mesh files for us noobs! Thanks in advance!

[lordg]

Originally Posted by diehard_rd

I am currently using ver 6.3.26 but it doesnt work in it. I guess it works only on 6.3.28 . A kind request to all the masters, to kindly design and create a mesh files for us noobs! Thanks in advance!

Hi...
Does it say it'S incompatible when you try to load the Libudf file?

[paka]

libudf... It means you need to recompile the source code according to your processor architecture and what operational system you are using. libudf is defined most likely as C file. There are also already compiled files, but what I see it means the original C file needs to be recompiled using fluent build in compiler. Try to look in Fluent documentation, it is pretty well explained.

[lordg]

Originally Posted by paka

libudf... It means you need to recompile the source code according to your processor architecture and what operational system you are using. libudf is defined most likely as C file. There are also already compiled files, but what I see it means the original C file needs to be recompiled using fluent build in compiler. Try to look in Fluent documentation, it is pretty well explained.

exactly...

[freeday]

I'm still have a problem. The recompile proses not running yet. It's still error. In the GUI written "nmake not recognized...".
May anybody can help me coz I'am an amateur in Fluent and still learning.
Thank's

[freeday]

I have done. Everything because the C++ and set Environment

[seucj]

Originally Posted by gholamghar

hello
i downloaded files of this tutorial from fluent.com but they are compatible with 6.3.28 and my solver is 6.3.21,could anybody please send me files of this tutorial(Simulation of Wave Generation in a Tank) that are older and are compatible with 6.3.21?
thanks

hi, can you give me a copy of the files about this tutorial?
thanks

[seucj]

Originally Posted by freeday

I have done. Everything because the C++ and set Environment

hi, do you have the files of the tutorial "Simulation of Wave Generation in a Tank", i can't find them in Fluent.com. now i have a project about oil tank which is analyzed by Fluent software. i need the libudf.c file coz i'm a learner in udf.
thanks very much

[teguhtf]

Originally Posted by seucj

hi, do you have the files of the tutorial "Simulation of Wave Generation in a Tank", i can't find them in Fluent.com. now i have a project about oil tank which is analyzed by Fluent software. i need the libudf.c file coz i'm a learner in udf.
thanks very much

check this http://www.fluent.com/software/sf_me...orial_wave.htm
teguhtf

[seucj]

Originally Posted by teguhtf

check this http://www.fluent.com/software/sf_me...orial_wave.htm
teguhtf

Thanks a lot for your reply, I get it~

[freeday]

Now, I want to capture Total Pressure every member or wall in my case. Can I get it automatically when iterate the program?
Maybe You can tell me how execute command work? Can I use it to solve my problem?

[trantoan2008]

Hi all,

I am studying "wave generation in a tank" tutorial to research my problem. However, I could not find "libudf" or "wave.msh" file to study them. Anybody can send me these file? I really need them to study my problem. Thanks for your help.
my email: trantoan2008@gmail.com

Originally Posted by freeday

Now, I want to capture Total Pressure every member or wall in my case. Can I get it automatically when iterate the program?
Maybe You can tell me how execute command work? Can I use it to solve my problem?

[freeday]

Dear: trontoan2008

Can U tell me, what series Fluent software do you have? Cos not all libudf can be used. Most of them we must build by C++ software.

[trantoan2008]

Hi Freeday,

I am using Fluent V6.3.26 s/w. I think If we have udf file, we can build it in Fluent based on C++ s/w. So, if you have this udf, please send to me.

I appriciate your helping.
Best regards,

Originally Posted by freeday

Dear: trontoan2008

Can U tell me, what series Fluent software do you have? Cos not all libudf can be used. Most of them we must build by C++ software.

[freeday]

I need your anothe remail address. Because trantoan2008@gmail.com is invalid.

Originally Posted by trantoan2008

Hi Freeday,

I am using Fluent V6.3.26 s/w. I think If we have udf file, we can build it in Fluent based on C++ s/w. So, if you have this udf, please send to me.

I appriciate your helping.
Best regards,