|
[Sponsors] |
How to udf the wall boundary condition in VOF |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 16, 2008, 01:47 |
How to udf the wall boundary condition in VOF
|
#1 |
Guest
Posts: n/a
|
Hi, I want to simulate the two phases flow in the porous media and outside the porous media with VOF model, but in Fluent, the porous media is treated as the fluid zone,However, the solid contact wall surface is needed for the VOF model for simulating the motion of the droplet on the porous media surface.So, in this case, the porous media surface is only interior for gas phase,but solid contact surface wall for liquid phase. Is there anyone konw wether it can be done by UDF and how to realize it by UDF, thanks very much.
|
|
December 24, 2008, 20:00 |
Re: How to udf the wall boundary condition in VOF
|
#2 |
Guest
Posts: n/a
|
hi I do the same topic, I think you can use pore scale approach which allows you to study two-phase flow in porous media without need to specify the fluid zone as a prorous medium.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
match uds boundary condition in wall & wall-shadow | pour | FLUENT | 0 | May 20, 2008 09:56 |
wall boundary condition | samee | FLUENT | 1 | March 24, 2008 00:31 |
Wall boundary condition – UDF | Ssn | FLUENT | 0 | January 25, 2008 04:43 |
boundary condition on a wall | Stéphane | FLUENT | 2 | June 10, 2005 11:17 |
wall boundary condition | woytex | Main CFD Forum | 1 | August 19, 2004 08:11 |