Hi, I installed the last version of Fluent and Gambit in linux environment, and I cannot start fluent. It opens the the graphic display, then I put the version and it shows the following message: path/bin/fluent: line 4820 : 25409 Violacion de segmento $NO_RUN $EXE_CMD $CX_FLAGS The fluent process could not be started. version>

Thanks for any help..

I have searched your problem by google. Some people have same problem as you. Which version of Linux do you use? Maybe the Linux version you use do not support Fluent. There is a list of FLUENT 6.3.26 supported platforms: http://www.fluent.com/software/platf...=fluent_6.3.26

Hi, I use SUSE 10.3 in this machine. You are right, the supported platforms list shows SUSE 9 and 10 as possible platforms, but I have another pc with SUSE 10.2 and Fluent works without any problem. What do you think that could be the problem?? Thanks a lot..

I am sorry that I can not said the details, because I have not installed Fluent with SUSE. Maybe someone who use SUSE can tell you. Regard you

[elavarasanastro]

hello
I am having this problem with ansys fluent 16.2. after Completing some iterations.


reversed flow in 3207 faces on pressure-outlet 21.

turbulent viscosity limited to viscosity ratio of 1.000000e+05 in 71753 cells
iter continuity x-velocity y-velocity z-velocity energy k epsilon time/iter
125 3.6341e-02 1.0710e-03 6.6915e-04 6.3201e-04 1.5747e-05 3.6417e-03 1.1346e-02 15082:14:28 499934
The fl process could not be started.

reversed flow in 1227 faces on pressure-outlet 18.

reversed flow in 943 faces on pressure-inlet 19.

reversed flow in 2281 faces on pressure-inlet 20.

reversed flow in 3207 faces on pressure-outlet 21.

turbulent viscosity limited to viscosity ratio of 1.000000e+05 in 71236 cells




I don't know that is wrong, could you please help

[Nish]

Hello friends. I am working on a 3D transient problem through a pipe. This is the second time I'm facing such a problem . I read similar threads which suggested that I might be running in parallel. But that is not the case. Kindly give me suggestions as how to overcome this issue? Thanks in advance.

Updating solution at time level N... done.
iter continuity x-velocity y-velocity z-velocity time/iter
15670 1.1675e-02 1.1292e-04 2.8036e-06 2.8207e-06 0:00:12 10
15671 3.6325e-02 5.8028e-03 1.2362e-04 1.2376e-04 0:00:10 9
15672 7.5230e-02 3.6935e-03 4.1503e-05 4.1309e-05 0:00:09 8
The fl process could not be started.