|
[Sponsors] |
Stall-Angle of an elliptical cross-section body |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 18, 2008, 07:55 |
Stall-Angle of an elliptical cross-section body
|
#1 |
Guest
Posts: n/a
|
Hi there,
I hope anyone can help me, because I'm really desperate. I need to calculate the lift coefficients versus angel of attack of different bodies with elliptic cross-section. As a 2D-simulation failed, I am now working 3D, and doing the simulation with the LES-solver. I have a very fine Grid, and my y+ is about 1. Nevertheless the lift coefficient does not drop at the critical point of about 20°, but has a further increase. I am very grateful for any kind of help. Stefan |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
dsmcInitialise - dsmcFoam | archymedes | OpenFOAM Pre-Processing | 94 | July 15, 2016 17:14 |
[Netgen] Import netgen mesh to OpenFOAM | hsieh | OpenFOAM Meshing & Mesh Conversion | 32 | September 13, 2011 06:50 |
how to assign cross section to line body? | fizie | ANSYS | 0 | March 17, 2011 10:41 |
Airfoil at stall angle | cfd_newbie | FLUENT | 10 | February 5, 2008 12:33 |
Cross section and surface area factor | Fabiana | CFX | 0 | January 10, 2006 00:51 |