|
[Sponsors] |
December 3, 2007, 07:10 |
Plot Y+ vs individual cell
|
#1 |
Guest
Posts: n/a
|
Hi, Can anybody show me how to plot the Y+ vs individual cell please.
Thank you. Kien |
|
December 3, 2007, 08:20 |
Re: Plot Y+ vs individual cell
|
#2 |
Guest
Posts: n/a
|
DO you want to plot along a curve?
|
|
December 3, 2007, 08:51 |
Re: Plot Y+ vs individual cell
|
#3 |
Guest
Posts: n/a
|
hi, Yes, please show me. Thank you.
|
|
December 3, 2007, 08:59 |
Re: Plot Y+ vs individual cell
|
#4 |
Guest
Posts: n/a
|
You have 2 possibilities, either you want to plot along a curve length or you want to plot along the coordinates of a certain curve. For both you have to go through making a curve from your object using iso-surface. Then you go to plot xy plot. If you want just curve length you go and change in x axis function and select that. (you can also have it on the y axis by changing from position on x axis to position on y axis in the options). If you want to plot with the coordinates you deselect position on x axis and you select x-coordinates (or y-coo. )in the x axis function (in the y axis...) and you select your curve in from surface. Hope that's all you need, if there is anything more, just ask.
|
|
December 3, 2007, 09:07 |
Re: Plot Y+ vs individual cell
|
#5 |
Guest
Posts: n/a
|
thank you very much. I'll try.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cells with t below lower limit | Purushothama | Siemens | 2 | May 31, 2010 22:58 |
Finding Coordinates of individual cell in U.internalField() | brosemu | OpenFOAM Programming & Development | 1 | November 5, 2009 17:34 |
Reporting pressure at individual cell faces | Shank | FLUENT | 0 | September 11, 2007 13:24 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 05:15 |
Warning 097- | AB | Siemens | 6 | November 15, 2004 05:41 |