CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

dynamic mesh + boundary layer cells

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 1, 2007, 17:27
Default dynamic mesh + boundary layer cells
  #1
Geri
Guest
 
Posts: n/a
Hi,

I'm using a simple udf for defining a prescribed motion for a rigid body with a boundary face zone moving with it. I want them move together, so i assigned the udf (compiled) to both. The problem is that i receive a bad message from fluent:

FLUENT received fatal signal...

If i assign the cg motion to the body only, it works, but the mesh not to good that case...

Can anybody guess my mistake???

many thanks
  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to set boundary layer of a moving body in GAMBIT to a mesh zone for dynamic mesh tomyangbath FLUENT 18 October 12, 2016 07:57
[snappyHexMesh] external flow with snappyHexMesh chelvistero OpenFOAM Meshing & Mesh Conversion 11 January 15, 2010 20:43
Dynamic Mesh with Boundary Layer Marcell FLUENT 0 March 11, 2009 09:40
Add a layer of cells, UDF, dynamic mesh or ...? Modisa FLUENT 0 March 17, 2007 12:59
Add a layer of cells, dynamic mesh or ...? Modisa FLUENT 1 March 12, 2007 03:01


All times are GMT -4. The time now is 15:53.