Falsh Tank with bauxite slurry -- CFD Online Discussion Forums

January 23, 2007, 02:47	Falsh Tank with bauxite slurry	#1
Hamid Nabati Guest Posts: n/a	I'm going to simulate a special flash tank using Fluent software as a part of my thesis. The flash tank is used in a process line in the Alumina factory. I would like to know whether it is possible fundamentally to use Fluent for this purpose or not? the complementary informatoions are as following: 1- The raw material entering the flash tank is bauxite slurry(a mixture of milled bauxite, lime and weak caustic liquor) 2- Inlet T and P are:270 C, 5.74 Mpa 3- Flash tank pressure :4.41 Mpa

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
interFoam / bubbleFoam to simulate an aerated tank	Meratb	OpenFOAM Running, Solving & CFD	3	November 6, 2020 12:45
Filling Tank with Water	leff	CFX	7	August 21, 2017 08:47
Simple Water Tank Transient	88phil88	CFX	5	March 17, 2014 04:48
Blow Tank Simulation ... Need Help!	treyevans	CFX	1	February 20, 2010 01:42
tank leakage	H	FLUENT	0	October 4, 2004 21:28

All times are GMT -4. The time now is 22:46.