|
[Sponsors] |
January 22, 2007, 23:39 |
combustion model in biomass gasifier
|
#1 |
Guest
Posts: n/a
|
Hi all,
I am a new user of fluent. Anybody that had experience in heat flow in biomass gasifier modeling, please tell me what are the important parameters that we need to use during pre and post processing. Thanks in advance. rayy |
|
January 23, 2007, 14:15 |
Re: combustion model in biomass gasifier
|
#2 |
Guest
Posts: n/a
|
Important parmeters include the fuel moisture content and heating value. Is plain air used for gasification or an oxygen enriched stream. What is the air temperature? You will need to know the gasification rate of the biomass, hopefully as a function of temperature, the products of gasification, and the ultimate amount of the biomass gasified. Will there be some combustion to generate heat for gasification? Will temperatures be hot enough that melting of inorganic component of biomass is a problem?
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 04:32 |
Where to find the theory for weller flamet combustion model | 21kalee | OpenFOAM Running, Solving & CFD | 7 | December 19, 2012 18:18 |
coal combustion model | yingkun | OpenFOAM Running, Solving & CFD | 0 | October 7, 2011 00:44 |
can alternate combustion model by UDF? | Han Xingsi | FLUENT | 0 | September 1, 2008 03:08 |
Biomass Downdraft Gasifier modeling | Aly | FLUENT | 2 | March 30, 2005 13:20 |