|
[Sponsors] |
January 1, 2007, 13:06 |
CFD of flow behind bluff body
|
#1 |
Guest
Posts: n/a
|
i am unable to get CP distribution at the stagnation point of the cylinder equal to 1.i am using fluent for solving this problem.
if somebody is working or is specilaised in this area please contact me as this will be very much useful for me to do further work.i am a novice user of fluent.please advise.i can provide further details of the problem -Puneshwar Verma |
|
January 1, 2007, 14:20 |
Re: CFD of flow behind bluff body
|
#2 |
Guest
Posts: n/a
|
Dear Puneshwar
to solve this problem first u must tell us r u use steady or unsteady solver, laminar or turbulent or inviscid what about the grid u used , also what is the value u obtained for cp , is the curve is similar to bublished one or very different, also what about your boundary condition ......,etc. i think if every thing r ok go to Report-->reference values--> change the pressure in this panel to its value at inlet . have a good luck Happy New Year Khairy -Egypt |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bluff body used for diffuser testing | lemat1 | Siemens | 0 | December 5, 2009 10:11 |
industrial applications of flow past bluff body | swamysrikanth | Main CFD Forum | 1 | December 1, 2009 04:55 |
Simulation of Flow induced vibration on an elastically mounted bluff body in a cross | pradeepta | FLUENT | 2 | September 17, 2009 08:18 |
Lifting Body CFD Analysis | Doug Gard | Main CFD Forum | 2 | August 18, 2006 18:41 |
UDF for lift force on a bluff body | sawa | FLUENT | 2 | April 11, 2005 04:06 |