|
[Sponsors] |
September 25, 2006, 10:19 |
(Tabular) Transient Boundary Condition ???
|
#1 |
Guest
Posts: n/a
|
Hi guys,
I would be very thankful if someone could help me out, with the following: I'am simmulating unsteady 3D-model with a continuous air-inflow. From t=0s I give a temperature (increase) pulse for about 0.2s at the inlet boundary condition. This step increase can easily be done by adjusting the boundary conidtion temperature manually. However since my experiments show different step shape (more Gaussian like, hence periodic). I want to make use of the Tabular Transient Profile so I can impose my experimental data for the short temperature increase. I tried to create such a profile file, but I don't get it worked. I checked the online manual and still I cannot get Fluent reading the profile file properly. Does any have an example for me of such a profile file or any suggestions. Thanks a lot. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
External Radiation Boundary Condition for Grid Interface | CFD XUE | FLUENT | 0 | July 9, 2010 03:53 |
External Radiation Boundary Condition (Two sided wall), Grid Interface | CFD XUE | FLUENT | 0 | July 8, 2010 07:49 |
vorticity boundary condition | bearcharge | Main CFD Forum | 0 | May 14, 2010 12:32 |
CFX Solver : Sudden crash | Hervé | CFX | 2 | June 16, 2008 07:40 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 05:15 |