UDF t o simulate Ionic transfer

August 30, 2006, 18:13

Hi guys, I am working on fuel cells and would like to simulate the Ionic transfer through the electrolyte, from the anode to the cathode. Any ideas as to how I can do that, what functions can be used. The question is pretty vague as I am mself at the initial stages. So any suggestions are welcome.

Thank you

August 31, 2006, 03:24

Fluent 6.2.16 has a (addon) fuel cell module. It requires an extra license but you can start with the reference guide (fl62fuelcells.pdf).

Good luck, RoM

August 30, 2006, 18:13	UDF t o simulate Ionic transfer	#1
Priya Guest Posts: n/a	Hi guys, I am working on fuel cells and would like to simulate the Ionic transfer through the electrolyte, from the anode to the cathode. Any ideas as to how I can do that, what functions can be used. The question is pretty vague as I am mself at the initial stages. So any suggestions are welcome. Thank you

August 31, 2006, 03:24	Re: UDF to simulate Ionic transfer	#2
RoM Guest Posts: n/a	Fluent 6.2.16 has a (addon) fuel cell module. It requires an extra license but you can start with the reference guide (fl62fuelcells.pdf). Good luck, RoM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
can VOF simulate 3 phase fluid?should i use UDF??	sincity	FLUENT	0	July 18, 2011 08:53
Hooking a DPM Particle Heat and Mass Transfer UDF to FLUENT	subhankar_bhandari	FLUENT	0	August 19, 2010 04:01
UDF for Heat transfer coefficient	Dong Wenchao	FLUENT	2	August 23, 2006 07:35
How to simulate mass transfer in heat exchanger?	Yang Bin	FLUENT	0	January 17, 2005 07:35
How to simulate heat and mass transfer for drying	olivia	FLUENT	1	June 20, 2001 14:04