|
[Sponsors] |
August 2, 2006, 10:58 |
what's wrong with my case??????
|
#1 |
Guest
Posts: n/a
|
Hi everyone!
I want to use VOF and solidification&melting model to simulate the melting of metal and the flow of liquid metal in fluent6.2. At first,I just made a simple case to implement my thought.the left region was patch in metal and right region was full of air.But the result go contrary to my wishes.the metal began to melt and flow on the fluence of the gravity even if there is no heat source was added. I use a sketch map to describe my problem.I don,t know why??Can anybody help me to solove this problem? Sorry my poor English.Thanks in advance |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
use batch mode to run an unsteady case | PaulineP | FLUENT | 9 | April 4, 2019 09:18 |
Numerical error or case error? Flow in a 3D pipe | fsalvucci | OpenFOAM | 40 | January 30, 2013 08:10 |
[snappyHexMesh] Editing the motorBike case, loading diffirent .stl | btgyd | OpenFOAM Meshing & Mesh Conversion | 1 | September 26, 2011 18:24 |
Free surface boudary conditions with SOLA-VOF | Fan | Main CFD Forum | 10 | September 9, 2006 13:24 |
Turbulent Flat Plate Validation Case | Jonas Larsson | Main CFD Forum | 0 | April 2, 2004 11:25 |