|
[Sponsors] |
June 8, 2006, 02:56 |
failure in dynamic mesh updating
|
#1 |
Guest
Posts: n/a
|
Hi everybody,
I've got a model with a moving wall. Unfortunately the mesh isn't updated whereas I specified it in the dynamic mesh panel. So after a few iterations, I've got this message: Mesh Statistics: Min Volume =-6.89746e-002 Max Volume =5.99320e+004 Warning: negative cell volume detected! Error: Update dynamic mesh failed! Error Object: () Any idea will be really appreciated! Many thanks. |
|
June 8, 2006, 05:47 |
Re: failure in dynamic mesh updating
|
#2 |
Guest
Posts: n/a
|
Hi i had same problem as you. you must change your remeshing and smoothing parameters to get a suitable mesh. hope you to be successful.
|
|
June 12, 2006, 05:57 |
Re: failure in dynamic mesh updating
|
#3 |
Guest
Posts: n/a
|
Hi guy,
Thank you very much for your advice. Furthermore I don't understand very well the example in the manual about the macro: DEFINE_GRID_MOTION. Can you please send me your UDF above all if it's a simple one!! My address is: alt_fabrice@hotmail.com Cheers, Fabrice. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation | tommymoose | ANSYS Meshing & Geometry | 48 | April 15, 2013 05:24 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |
Extended version: Dynamic mesh | fusij | OpenFOAM | 2 | February 18, 2011 03:12 |
[mesh manipulation] Dynamic Mesh Diffusivity Problem | dancfd | OpenFOAM Meshing & Mesh Conversion | 0 | August 29, 2010 12:50 |
dynamic mesh and sliding mesh | nasser | FLUENT | 0 | November 1, 2005 03:37 |