Home > Forums > Software User Forums > ANSYS > FLUENT

axisymmetric main flow + injection

Updated Threads

Reply

Search this Thread

January 19, 2006, 12:15	axisymmetric main flow + injection	#1
Stephan Guest Posts: n/a	How do I model the mixing of an axisymmetric flow + swirl in one pipe and another flow that is injected through a single pipe on the side. the geometry is not symmetric. I have problems creating a valid grid cause the axis of the mean flow is not an axis of symmetry of the whole geometry.

January 19, 2006, 12:43	Re: axisymmetric main flow + injection	#2
hioi Guest Posts: n/a	thkkkkkkkkkkkk

Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drag Force on Axisymmetric Cone in Mach 5 Flow	SleeperService	FLUENT	0	February 28, 2011 01:56
Level set equation in axisymmetric 2-D flow	jinwon park	Main CFD Forum	0	February 26, 2008 17:26
Test for a laminar flow in axisymmetric nozzle	Victor	Main CFD Forum	0	November 30, 2005 11:51
Convergence for axisymmetric flow	bl201	Main CFD Forum	5	August 16, 2005 18:01
URGENT ! Need help on Axisymmetric Flow !	Suman Kumar	Main CFD Forum	1	November 20, 2001 15:51

All times are GMT -4. The time now is 00:50.