|
[Sponsors] |
January 16, 2006, 21:59 |
Hydrodynamics of High Density CFB
|
#1 |
Guest
Posts: n/a
|
Hi everybody,
I am trying to simulate hydrodynamics of high density gas-solid circulating fluidized bed using Fluent 6.2.16. I know that many people have succeeded doing so; but min doesn't work. I couldn't get the perfect core annulus regime. I do have less particle concentration at the center and then more solids in the two sides but near the wall I do have dilute phase goes to zero concentration. My system has 70 micron FCC particles, specularity coeff of 0.5, E-wall 0.95, riser height 6.4 m, and Riser diameter 0.0762 m. I am suspecting the wall boundary condition. I would really appreciate if somebody has helpful hint or advice. |
|
February 13, 2010, 22:23 |
same problem
|
#2 |
New Member
Moatazbellah Mahmoud Mousa
Join Date: May 2009
Posts: 12
Rep Power: 17 |
Adnan,
I am facing exactly the same problem here; of absence of catalyst just beside the riser wall. I will really appreciate if you can share with me any of your findings as I am in a bad need to solve this problem. Thanks in advance, Moataz |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
High density flow - twoPhaseEulerFoam solver | raagh77 | OpenFOAM Running, Solving & CFD | 0 | May 29, 2009 05:49 |
Problem on high density ratio in Level Set method | Kai Yan | Main CFD Forum | 10 | December 25, 2007 07:12 |
REAL GAS UDF | brian | FLUENT | 6 | September 11, 2006 09:23 |
Warning 097- | AB | Siemens | 6 | November 15, 2004 05:41 |
Multicomponent fluid | Andrea | CFX | 2 | October 11, 2004 06:12 |