 |
 |
 |
|
|
|
[Sponsors] | ||||
June 29, 2005, 15:19
|
low re model activation error in 6.2
|
#1 |
|
Guest
Posts: n/a
|
Whil;e trying to activate the low re turbulence models in fluent, I get the following message. How can I activate it?
Thanks Anindya /define/models/viscous/turbulence-expert> help Type "?<command>" for help on a specific command. Type "?" to enter help mode, and "q" to exit help mode. The commands below are available in this menu. Those followed by "*" are currently disabled. kato-launder-model?* non-newtonian-modification?* turb-non-newtonian? kw-vorticity-based-production?* restore-sst-v61? turb-pk-compressible?* low-re-ke-index* rke-cmu-rotation-term?* low-re-ke?* thermal-p-function?* /define/models/viscous/turbulence-expert> de-mo-vi-turb-lo invalid command [de-mo-vi-turb-lo] |
|
|
||
|
June 29, 2005, 15:41
|
Re: low re model activation error in 6.2
|
#2 |
|
Guest
Posts: n/a
|
You have to choose any k-epsilon model in gui first and then you can activate the low-Re model via tui with: def mod vis turb low y.
|
|
|
|
||
|
June 29, 2005, 18:33
|
Re: low re model activation error in 6.2
|
#3 |
|
Guest
Posts: n/a
|
Thanks dirk. Will try it out now.
|
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| which turbulence model is fit for low speed axial compressor？ | sukiska | Fidelity CFD | 1 | July 20, 2011 10:58 |
| Low pressure drop with the same model | zhoubinwx | OpenFOAM Running, Solving & CFD | 5 | June 16, 2009 06:10 |
| How to activate low reyonds k-e model in CFX10.0? | Li | CFX | 0 | October 1, 2007 09:31 |
| UPWIND-BIASED and Low Re K-Epsilon Model | Valdemir G. Ferreira | Main CFD Forum | 5 | June 20, 2000 00:13 |
| a low Re number model for impinging jets | mahesh prakash | Main CFD Forum | 14 | September 3, 1999 17:40 |
Linear Mode
