Mass Conservation -- CFD Online Discussion Forums

May 11, 2005, 08:16	Mass Conservation	#1
Balaji Guest Posts: n/a	hi, I am injecting Helium in a 10m X 2m Rectangular Closed domain. The mass flow rate is 0.0017Kg/s.This is unsteady problem. After few seconds I am calculating the total mass injected by Time*mass flow rate. This should be equall to mass averaged species mass fraction which is reported in Volume integrals. But i am getting 10 times higher values by Fluent. Can anyone suggest what the problem is. Thanks in advance.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 06:21
Mass conservation in COMSOL	Diego	COMSOL	1	December 27, 2010 06:14
lost of mass conservation	jjchristophe	FLUENT	0	June 18, 2010 06:44
Mass conservation problem in mixing tank multiphase simulation	rockewan	FLUENT	0	April 6, 2010 13:34
Mass conservation	Diego Nogueira	Main CFD Forum	1	July 30, 2004 16:50

All times are GMT -4. The time now is 14:48.