CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Porous jump for filter

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 6, 2005, 07:20
Default Porous jump for filter
  #1
Saturn
Guest
 
Posts: n/a
Hi:

I set a porous jump for filter. The filter will filter out the particles. but the porous jump condition is a interior for the DPM.

How do I set the porous jump that air flow will pass and particle will be fitered??

Thanks a lot!
  Reply With Quote

Old   April 6, 2005, 09:23
Default Re: Porous jump for filter
  #2
Yazid
Guest
 
Posts: n/a
check your permeability coefficient ....and particle size should be smallar then your permability C2
  Reply With Quote

Old   March 7, 2013, 12:40
Default
  #3
New Member
 
Join Date: Mar 2013
Posts: 8
Rep Power: 13
Leram is on a distinguished road
Quote:
Originally Posted by Yazid
;119359
check your permeability coefficient ....and particle size should be smallar then your permability C2
What if there is air and water and the Porous Jump is only permeable to air? Any comment on this?

Thanks,
Leram
Leram is offline   Reply With Quote

Old   October 23, 2014, 11:39
Default hi
  #4
New Member
 
Join Date: Oct 2014
Posts: 3
Rep Power: 12
dezfuli is on a distinguished road
hi. i try simulate a membrane by porous media.i have information about different between porous media and porous jump. please help me. thanks
dezfuli is offline   Reply With Quote

Old   October 23, 2014, 11:44
Default
  #5
New Member
 
Join Date: Oct 2014
Posts: 3
Rep Power: 12
dezfuli is on a distinguished road
Quote:
Originally Posted by dezfuli View Post
hi. i try simulate a membrane by porous media.i have information about different between porous media and porous jump. please help me. thanks
i have user input details
dezfuli is offline   Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] How can I define different zones in ICEM? llrr ANSYS Meshing & Geometry 14 February 12, 2017 14:44
[Commercial meshers] Porous Jump creation problem mulfal OpenFOAM Meshing & Mesh Conversion 4 December 9, 2013 12:59
Porous jump in urban environment samygero FLUENT 0 February 14, 2011 19:26
Porous Jump Naresh FLUENT 0 April 25, 2007 16:36
Testing the integrity of POROUS media and por jump Azman FLUENT 0 July 31, 2006 12:11


All times are GMT -4. The time now is 18:53.