this is the promption:

Cannot open connect stream. TRANS(SocketINETGetAddr): tnamebysocket() failed TRANS(SocketINETConnect): TRANS(SocketINETGetAddr) () failed TRANS(Open): transport open failed for tcp/LOCALPC:0 Unable to open display

please help me to solve it

thanks a lot.

I had the same problem. but i got around it now... Not a nice solution but it works.

i start gambit with: cmd cd c:\fluent.inc\ntbin\ntx86 set display=:0.0 gambit -id pipe

have the same problem, but I tried your solution and the compurter says : system cannot find the path specified.

but everything else is working (Fluent)

have any idea?

thanks

I see that it is unclear that i am saying 4 commands. first one is to go to the "Dos" window:

cmd

Then i go to the directory where fluent (gambit) is installed:

cd c:\fluent.inc\ntbin\ntx86

The trick that works with me is:

set display=:0.0

and then i start gambit with:

gambit -id pipe

[oxidising agent]

Hi, hope you have succeeded in running gambit.?
If not please try the procedure below. I had xactly the same problem. It easily worked for me as per this procedure.

(1) Start > Hummingbird Connectivity > Exceed > Exceed (Appln will open and u will see Exceed on task bar)

(2) R-click (Exceed on task bar) > Tools > Session Startup > New (Untitled X-session window will open)

(3) Click Directory.. > Select the folder where you have installed Gambit(generally the folder is Fluent.Inc) > Select gambit2.3.16 > OK

(4) Click New Program > Select Windows App > OK (Untitled Wstart window will open)

(5) Click Browse > Select Gambit ".exe" file > Select Run : Normal Mode > Run! (this will launch gambit application successfully)

(6) Set the working directory in the application > Run
(Gambit is launched / runs successful)

Regards,
Oxidising Agent (sanketssg@gmail.com)