 |
 |
 |
|
|
|
[Sponsors] | ||||
November 14, 2004, 12:00
|
porous jump
|
#1 |
|
Guest
Posts: n/a
|
In my problem, grain is stored in a cylindrical tank. The grain is modeled as porous zone (all props calculated as per 6.19.6 User Inputs for Porous Media in fluent manual. Now at the bottom of tank there is a perforated plate. There is significant leakage of gas from the tank thru this plate. How do I model it? Gravity in my model is off. The only force driving is diffusion force? How do I calculate parameters for porous jump? The velocity of flow is really really small thru this plate. Please advise as soon as possible.
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [ICEM] How can I define different zones in ICEM? | llrr | ANSYS Meshing & Geometry | 14 | February 12, 2017 14:44 |
| [Commercial meshers] Porous Jump creation problem | mulfal | OpenFOAM Meshing & Mesh Conversion | 4 | December 9, 2013 12:59 |
| Porous jump in urban environment | samygero | FLUENT | 0 | February 14, 2011 19:26 |
| Porous Jump | Naresh | FLUENT | 0 | April 25, 2007 16:36 |
| Testing the integrity of POROUS media and por jump | Azman | FLUENT | 0 | July 31, 2006 12:11 |
Linear Mode
