|
[Sponsors] |
April 7, 2004, 03:41 |
How to activate"spring-all-shapes"?
|
#1 |
Guest
Posts: n/a
|
I use dynamic mesh model to simulate a FSI problem, and the user-defined motion type was adopted based UDF. I found the spring-based mesh motion method did not work when structural mesh or mixed mesh with structural boundary layer mesh was used, so I want to activated the function"spring-all-shapes" through text command according to Fluent Guide.
Fluent prompts:"By default, spring-based smoothing on non-triangular or non-tetrahedral cell zones are turned off. If you want to use spring-based smoothing on all cell shapes, you can turn on the model for these zones using the text-interface command spring-on-all-shapes? in the dynamic-mesh-menu." But the fllowing error occurs when I input the command "spring-on-all-shapes". /define/models/dynamic-mesh-controls> spring-on-all-shapes Error: eval: unbound variable Error Object: help How to solve this problem?Thanks |
|
April 7, 2004, 08:58 |
Re: How to activate"spring-all-shapes"?
|
#2 |
Guest
Posts: n/a
|
You can try this command: (rpsetvar 'dynamesh/spring/all-element-type? #t) with parenthesis and everything. Good luck
Tonje |
|
April 8, 2004, 09:45 |
Re: How to activate"spring-all-shapes"?
|
#3 |
Guest
Posts: n/a
|
Thank you for you reply. I input this command in the text command:
> (rpsetvar'dynamesh/spring/all-element-type?#t) but fluent says: Error: rp-var-value-set!: undefined variable Error Object: dynamesh/spring/all-element-type?#t How to solve this problem? |
|
April 9, 2004, 03:11 |
Re: How to activate"spring-all-shapes"?
|
#4 |
Guest
Posts: n/a
|
input command with spaces as Tonje say !
|
|
December 28, 2020, 23:04 |
|
#5 |
New Member
central province
Join Date: Oct 2020
Posts: 9
Rep Power: 5 |
please help me I used this command but still error is there
command : (rpsetvar 'dynamesh/spring/all-element-type? #t) error : invalid command [- rpsetvar] |
|
|
|