What this means?

May 26, 2003, 19:33

Getting warning when reading MSH file and check is not envoked "Note: Separating wall zone 5 into zones 5 and 6.

wall -> wall (5) and wall:006 (6) WARNING: cell 380377 of thread 1 has NULL face pointer 1.Error: Build_Grid: grid error.

Clearing partially read grid."

June 2, 2003, 04:44

Hi Neu,

In gambit check whether there r some other volumes which is not connected to the main domain or just over lapped each other which is useless.... my suggestion is to check the geometries and if there is any unnecessary geometry which may create the problem.

Alamgir

May 26, 2003, 19:33	What this means?	#1
neu Guest Posts: n/a	Getting warning when reading MSH file and check is not envoked "Note: Separating wall zone 5 into zones 5 and 6. wall -> wall (5) and wall:006 (6) WARNING: cell 380377 of thread 1 has NULL face pointer 1.Error: Build_Grid: grid error. Clearing partially read grid."

June 2, 2003, 04:44	Re: What this means?	#2
Alamgir Guest Posts: n/a	Hi Neu, In gambit check whether there r some other volumes which is not connected to the main domain or just over lapped each other which is useless.... my suggestion is to check the geometries and if there is any unnecessary geometry which may create the problem. Alamgir

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
error means?	hanid	Main CFD Forum	0	September 8, 2008 14:25
what's couple in wall boundary conditions means?	eve	FLUENT	1	July 23, 2007 13:20
BC evaluation by means of external lists allocated in the solver	shrina	OpenFOAM Running, Solving & CFD	2	January 18, 2007 12:29
plot order points... what does it means ?	Cyril	FLUENT	0	June 7, 2006 06:56
What means % in Fortran?	What means % in Fortran	Main CFD Forum	2	April 20, 2004 15:34