Density variation Turbulent flow

January 15, 2003, 15:12

Hi all, Can anyone explain to me, how do we define density in Turulent modeling in FLUENT in the materials window, i mean there are four five options, one is constant, ideal gas and then others, My flow problem is compressible turbulent flow problem, so obviously density is varying but how to specify it here. Because for the option of polynomial there are no coefficients given for density variation with temperature. please help

January 17, 2003, 00:16

Just mention that the phase (air) is compressible.

Alamgir

January 15, 2003, 15:12	Density variation Turbulent flow	#1
Parshant Dhand Guest Posts: n/a	Hi all, Can anyone explain to me, how do we define density in Turulent modeling in FLUENT in the materials window, i mean there are four five options, one is constant, ideal gas and then others, My flow problem is compressible turbulent flow problem, so obviously density is varying but how to specify it here. Because for the option of polynomial there are no coefficients given for density variation with temperature. please help

January 17, 2003, 00:16	Re: Density variation Turbulent flow	#2
Alamgir Guest Posts: n/a	Just mention that the phase (air) is compressible. Alamgir

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 06:21
reversed flow at pressure inlet and turbulent viscosity is limited....	cfdiscool	FLUENT	10	June 10, 2015 07:15
dieselFoam- Density and mass flow rate	Rachel	OpenFOAM Running, Solving & CFD	1	July 20, 2009 07:36
Need advice on reaction in Turbulent Flow	Angelo Sozzi	FLUENT	0	March 12, 2005 21:01
Turbulent steady flow around a circular cylinder	Mirek Kabacinski	FLUENT	0	July 23, 2003 19:40