 |
 |
 |
|
|
|
[Sponsors] | ||||
December 9, 2002, 08:18
|
small problem
|
#1 |
|
Guest
Posts: n/a
|
how can i watch the results in the different level of meshes.i mean i have a 3d model and i cant see the result after run the programm in the different level of elements.just in the bed or wall or... . thanks
|
|
|
||
|
December 9, 2002, 11:55
|
Re: small problem
|
#2 |
|
Guest
Posts: n/a
|
You can define surface or line in u r geometry at any location u wanna see the result to do so from surface>>line/Rack and define u r plain or what ever.. hope it work for u Regards Sohail
|
|
|
|
||
|
December 12, 2002, 02:23
|
Re: small problem
|
#3 |
|
Guest
Posts: n/a
|
u also can create the surface with many options then see the results on that surfaces.
Alamgir |
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [Commercial meshers] Handling cyclic BC from gambit to openfoam for a cascade airfoil problem - OF 1.6 | maverick | OpenFOAM Meshing & Mesh Conversion | 2 | June 18, 2011 05:36 |
| [Other] Shadow wall region problem | amoolraina | ANSYS Meshing & Geometry | 0 | July 25, 2010 22:17 |
| Velocity profiles problem behind the elbow (3D problem) | kabat73 | FLUENT | 8 | May 9, 2010 05:26 |
| [Other] surfaceCheck problem | vivien | OpenFOAM Meshing & Mesh Conversion | 0 | May 7, 2010 05:24 |
| extremely simple problem... can you solve it properly? | Mikhail | Main CFD Forum | 40 | September 9, 1999 10:11 |
Linear Mode
