CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Problem starting Fluent

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 25, 2002, 09:41
Default Problem starting Fluent
  #1
Ankan Kumar
Guest
 
Posts: n/a
I am trying to install and run Fluent. But at the outset there is a message coming up "Flexlm Error---System clock has been set back" and then Fluent fails to load. Whats the problem..? The date on my PC is not changed. What is the way out..?PLease help! Thanks
  Reply With Quote

Old   October 25, 2002, 10:13
Default Re: Problem starting Fluent
  #2
Erwin
Guest
 
Posts: n/a
I just saw the same problem on an NT machine...

I don't know yet what is causing it, but I know how you can circumvent it. Assuming you are running NT, do not start Fluent from the Programs menu but open up a DOS Command window. Change to a drive where Fluent is not located (or not part of the PATH, dunno yet) and then start it up by the command 'Fluent 3d'.

  Reply With Quote

Old   October 28, 2002, 05:44
Default Re: Problem starting Fluent
  #3
Gavin Buckton
Guest
 
Posts: n/a
This is a security measure to prevent people setting the date back on thier machines to prolong the usage of the license.

Check that the time and date are correct on the machine and then do a search for files by date, the start date being the current date and leave the other date blank. This will search the machine for all files with a future date on them. Delete or move these files off the system and restart the machine. Hope this helps.
  Reply With Quote

Old   October 28, 2002, 06:33
Default Re: Problem starting Fluent
  #4
Ankan Kumar
Guest
 
Posts: n/a
thanks for your responses..dunno what was the problem..Just reinstalled windows and everything is working fine.
  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent - license problem. Marcin FLUENT 3 April 13, 2018 17:33
Problem running a parallel fluent job on local machine via mpd highhopes FLUENT 0 March 3, 2011 06:07
[ICEM] [FLUENT] 2D Geometry problem when exporting to Fluent - Unwanted walls MikeTichondrius ANSYS Meshing & Geometry 1 February 9, 2011 14:31
Can Fluent 6.0.20 predict this problem right? Yazid Bindar FLUENT 0 March 5, 2003 09:07
Can FLUENT solve this type of problem? Whitaker FLUENT 3 October 23, 2000 04:01


All times are GMT -4. The time now is 14:08.