|
[Sponsors] |
August 9, 2002, 20:41 |
help for Gambit: 2 edges + 1 boundary layer
|
#1 |
Guest
Posts: n/a
|
I encountered a difficulty with Gambit that I can not solve after several day's trial.
In a rectangular virtual face I built a boundary layer (altogether M layers, lets say M=10) at the bottom virtual edge. That's O.K. Then whenever I tried to mesh the two vertical virtual edges in to N (N>M, lets say N = 20) equal space parts, the left vertical edge will include the boundary layer into its meshing scheme so it will have 10 meshing withing boundary layer and another 10 meshing beyond boundary layer, but the right vertical edge will not do like this, it is BLIND to the boundary at all so it has totally 20 exactly equal meshing. In this way, a distorted quadrilateral meshing was produced. Hope to get experts' opinion. Thanks. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Boundary layer in a pipe | Clementhuon | OpenFOAM Meshing & Mesh Conversion | 6 | March 12, 2012 13:41 |
[GAMBIT] 3D boundary layer and meshing problem in GAMBIT 2.4.6 | prashanthreddyh | ANSYS Meshing & Geometry | 1 | December 20, 2011 01:35 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 20:43 |
3D Boundary Layer | Mario | FLUENT | 0 | February 17, 2009 04:40 |
boundary layer thickness | 98.4F | Main CFD Forum | 1 | December 29, 2000 08:23 |