How to intrduceMonitoring points for XY plot?

January 3, 2002, 12:09

Hello Fellows! I need to know about introducing monitoring points on the centre line of a pipe to monitor the temperature change on those points so then i can plot those with position along pipe flow direction. In fluent 5.5 i have found XY plot along a plane but i want only the points on the center line of pipe. Guide me. Thank you.

January 4, 2002, 01:00

go "Surface-> Line/Rake" in Fluent. You can make a center line and monitor the temperature change.

January 9, 2002, 13:11

1. Create point "surfaces" (Surfaces-->Point..)

2. Use the Solve-->Monitor-->Surface to set up individual monitors for each of your surfaces. You specify the average value of the variable you want to write and specify the file-name. You can plot, print (to the console) and write your monitred values to file.

3. Review the FLUENT 5.5 Users' Guide Sections 17.15 and 17.16 for more tips

January 3, 2002, 12:09	How to intrduceMonitoring points for XY plot?	#1
zahid Guest Posts: n/a	Hello Fellows! I need to know about introducing monitoring points on the centre line of a pipe to monitor the temperature change on those points so then i can plot those with position along pipe flow direction. In fluent 5.5 i have found XY plot along a plane but i want only the points on the center line of pipe. Guide me. Thank you.

January 4, 2002, 01:00	Re: How to intrduceMonitoring points for XY plot?	#2
chiseung Guest Posts: n/a	go "Surface-> Line/Rake" in Fluent. You can make a center line and monitor the temperature change.

January 9, 2002, 13:11	Re: How to intrduceMonitoring points for XY plot?	#3
Lanre Guest Posts: n/a	1. Create point "surfaces" (Surfaces-->Point..) 2. Use the Solve-->Monitor-->Surface to set up individual monitors for each of your surfaces. You specify the average value of the variable you want to write and specify the file-name. You can plot, print (to the console) and write your monitred values to file. 3. Review the FLUENT 5.5 Users' Guide Sections 17.15 and 17.16 for more tips

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD-Post: Polyline Export at Integration Points	minger	ANSYS	4	February 22, 2014 10:23
[snappyHexMesh] jagged, ragged edges...	ziemowitzima	OpenFOAM Meshing & Mesh Conversion	138	July 24, 2012 00:41
[blockMesh] BlockMeshmergePatchPairs	hjasak	OpenFOAM Meshing & Mesh Conversion	11	August 15, 2008 08:36
plot order points... what does it means ?	Cyril	FLUENT	0	June 7, 2006 06:56
extreme points problem	Lipo Wang	Main CFD Forum	2	August 18, 2004 04:15