 |
 |
 |
|
|
|
[Sponsors] | ||||
December 20, 2023, 04:35
|
Porous medium mesh quality
|
#1 |
|
New Member
Kirill
Join Date: Dec 2023
Posts: 3
Rep Power: 2  |
Hi everyone!
I'm interested in some special rules for generating a mesh in a porous medium. I read the user manual and found a lot of interesting options information, but not on this issue. What about quality of mesh inside it? Conform or non-conform connections of fluid and porous zones? If I understand correct, for superficial velocity formulation and approximated turbulence we don't need boundary layers, is't right? Thanks for answers! Last edited by Schwarz2012; December 21, 2023 at 01:57. Reason: Wrong term |
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] snappyHexMesh does not detect highly skewed faces? | ptpacheco | OpenFOAM Meshing & Mesh Conversion | 1 | January 4, 2022 13:37 |
| [snappyHexMesh] Improving mesh quality + inlet too coarse | MartinBlx | OpenFOAM Meshing & Mesh Conversion | 5 | August 2, 2015 23:09 |
| snappyhexmesh remove blockmesh geometry | philipp1 | OpenFOAM Running, Solving & CFD | 2 | December 12, 2014 11:58 |
| [Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |
| Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 19:10 |
Linear Mode
