Home > Forums > Software User Forums > ANSYS > FLUENT

Fluent 2d different plates

Updated Threads

Reply

Search this Thread

October 27, 2023, 08:10	Fluent 2d different plates	#1
karadagli New Member Mimar Sinan Join Date: Oct 2023 Posts: 1 Rep Power: 0	Greetings; I have a geometry whose shapes I have added. I have made interfaces. I have shown the region where I give 5000W heat, the lower part consists of air and the upper part consists of different materials in layers. but I cannot observe the heat transfer in the fins while the air is heating. can you help. [IMG][/IMG]

Reply

Tags

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] Unknown error when converting fluent mesh to openfoam	Yutao	OpenFOAM Meshing & Mesh Conversion	0	April 23, 2023 03:30
Error: WorkBench Error: Could not handle event: SolutionStatusUpdate	Kieyo	Fluent Multiphase	0	November 10, 2022 00:58
CFX vs. FLUENT	turbo	CFX	4	April 13, 2021 09:08
heat transfer with RANS wall function, over a flat plate (validation with fluent)	bruce	OpenFOAM Running, Solving & CFD	6	January 20, 2017 07:22
Fluent 12.0 is worst then Fluent 6.2	herntan	FLUENT	5	December 14, 2009 03:57

All times are GMT -4. The time now is 19:19.