|
[Sponsors] |
Negative Nusselt number at a mixed convection simulation |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 19, 2022, 10:56 |
Negative Nusselt number at a mixed convection simulation
|
#1 |
New Member
Mashrur Muntasir Nuhash
Join Date: Sep 2022
Posts: 2
Rep Power: 0 |
Can anybody suggest to me how to calculate the surface Nusselt number in a mixed convection simulation in Ansys Fluent?
The simulation is a laminar internal flow problem which includes a 1-meter-long pipe with constant heat flux. If I input the volume average of the fluid temperature as reference temperature, the Nusselt number becomes negative. The fluid properties are temperature-dependent. I created a UDF for them. Thanks in advance. Cheers! |
|
Tags |
ansys fluent, negative nusselt number |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Decomposing meshes | Tobi | OpenFOAM Pre-Processing | 22 | February 24, 2023 09:23 |
Seakeeping Solver:Crashed | akbarbagusd | Fidelity CFD | 0 | November 5, 2021 12:42 |
[Other] Equal decomposition of cylindrical fluid domain | Sean95 | OpenFOAM Meshing & Mesh Conversion | 3 | February 12, 2019 03:34 |
AMI interDyMFoam for mixer | danny123 | OpenFOAM Running, Solving & CFD | 4 | June 19, 2013 04:49 |
[blockMesh] error message with modeling a cube with a hold at the center | hsingtzu | OpenFOAM Meshing & Mesh Conversion | 2 | March 14, 2012 09:56 |