Post-Processing using Paraview with Fluent Data

KelvinTan · January 26, 2021, 01:06

Hi all,

I am a fairly new user of both ANSYS fluent and Paraview software. The background is that I have done both steady-state simulation and transient simulation in Fluent for a Jet-in-crossflow simulation for my undergraduate study and currently trying to post-process the results. My professor requires me to use Paraview for post-processing instead of CFD-post for better visualization of the flow analysis.

I have read through different threads about exporting fluent data file using Ensight Case Gold format (binary) and then reading it using Paraview. I was successful in doing so and am able to do some post-processing such as slicing with parameters of interest(velocity, vorticity, etc). However, I currently am not able to plot the contour and streamline for both cases as Paraview software will just crash once I press apply. So, I would like to ask the community if anyone has any idea about this case? Thank you!

kjde21 · June 19, 2023, 06:36

Salut. Désolé je ne peux pas t'aider car j'ai un problème.
Comment tu fais pour lire un fichier Fluent sur Paraview. Moi je n'y arrive pas.

January 26, 2021, 01:06	Post-Processing using Paraview with Fluent Data	#1
KelvinTan New Member Kelvin Tan Join Date: Dec 2019 Posts: 1 Rep Power: 0	Hi all, I am a fairly new user of both ANSYS fluent and Paraview software. The background is that I have done both steady-state simulation and transient simulation in Fluent for a Jet-in-crossflow simulation for my undergraduate study and currently trying to post-process the results. My professor requires me to use Paraview for post-processing instead of CFD-post for better visualization of the flow analysis. I have read through different threads about exporting fluent data file using Ensight Case Gold format (binary) and then reading it using Paraview. I was successful in doing so and am able to do some post-processing such as slicing with parameters of interest(velocity, vorticity, etc). However, I currently am not able to plot the contour and streamline for both cases as Paraview software will just crash once I press apply. So, I would like to ask the community if anyone has any idea about this case? Thank you!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
post processing discrete phase with paraview	mighelone	FLUENT	3	March 9, 2021 05:34
ploting of U+ and Y+ in fluent post processing	harshavardhanps383	FLUENT	0	January 21, 2021 12:03
Data Export From Fluent and Ansys Post Processing	Patelp1996	FLUENT	0	September 18, 2020 01:54
Animation of Fluent data with paraview	Lilly	FLUENT	1	June 26, 2016 17:07
fluent for post processing	James	FLUENT	0	April 21, 2006 05:43

June 19, 2023, 06:36		#2
kjde21 New Member Join Date: May 2023 Posts: 4 Rep Power: 3	Salut. Désolé je ne peux pas t'aider car j'ai un problème. Comment tu fais pour lire un fichier Fluent sur Paraview. Moi je n'y arrive pas.