VIV on a moving cylinder

Erfan785 · December 7, 2020, 12:47

Hi guys.
I want to simulate a vortex-induced vibration case on a moving cylinder. I searched the web for tutorials. But all of them were about flow past a stationary cylinder. Is there anyone who knows about this simulation? I will be very grateful if you send me a tutorial link.

Thanks.

duri · December 7, 2020, 15:28

If your cylinder moving with uniform velocity then it matter of frame of reference. Stationary and moving cylinder relative to wind will not have any difference. In case of accelerating cylinder, see moving mesh methods. Check for flutter problems.

Erfan785 · December 8, 2020, 00:05

Hi duri,
In my case, the fluid is the reason for the cylinder movement. I mean, suppose that you've put a cylinder in the ocean. the waves and water's movement causes the cylinder to move. I want to have a sinusoidal velocity at the inlet and simulate the response of the cylinder. In other words, the movement of the cylinder is the result of the simulation and the inlet velocity is a boundary condition.

duri · December 9, 2020, 05:37

Please check store separation problems. Same method would work for this case.

December 7, 2020, 12:47	VIV on a moving cylinder	#1
Erfan785 New Member Join Date: Dec 2020 Posts: 4 Rep Power: 5	Hi guys. I want to simulate a vortex-induced vibration case on a moving cylinder. I searched the web for tutorials. But all of them were about flow past a stationary cylinder. Is there anyone who knows about this simulation? I will be very grateful if you send me a tutorial link. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VIV of cylinder using pimpleDyMFoam	kkpal	OpenFOAM Running, Solving & CFD	10	September 14, 2024 10:15
[ICEM] 2D meshing of tandem cylinder in VIV for dynamic simulation	mhamiddi2	ANSYS Meshing & Geometry	0	May 16, 2019 06:50
Cylinder with one end moving wall. Error message fatal overflow of linear solver.	visitor	Main CFD Forum	0	December 9, 2018 08:47
VIV Square Cylinder	lazze12	FLUENT	0	September 1, 2015 23:32
Cylinder moving in fluid,Solution diverging	arun7328	STAR-CCM+	5	February 27, 2013 15:28

December 7, 2020, 15:28		#2
duri Senior Member duri Join Date: May 2010 Posts: 245 Rep Power: 17	If your cylinder moving with uniform velocity then it matter of frame of reference. Stationary and moving cylinder relative to wind will not have any difference. In case of accelerating cylinder, see moving mesh methods. Check for flutter problems.

December 8, 2020, 00:05		#3
Erfan785 New Member Join Date: Dec 2020 Posts: 4 Rep Power: 5	Hi duri, In my case, the fluid is the reason for the cylinder movement. I mean, suppose that you've put a cylinder in the ocean. the waves and water's movement causes the cylinder to move. I want to have a sinusoidal velocity at the inlet and simulate the response of the cylinder. In other words, the movement of the cylinder is the result of the simulation and the inlet velocity is a boundary condition.

December 9, 2020, 05:37		#4
duri Senior Member duri Join Date: May 2010 Posts: 245 Rep Power: 17	Please check store separation problems. Same method would work for this case.