 |
 |
 |
|
|
|
[Sponsors] | ||||
April 6, 2020, 04:48
|
Slip boundary condition
|
#1 |
|
New Member
Homayoun Shabani
Join Date: Dec 2019
Posts: 4
Rep Power: 7  |
Hi everybody.
I would like to model a micro-channel under slip boundary condition, but I don't have any tutorials or videos, moreover I don't know how to check its accuracy. I appreciate it if you could help me. thanks in advance. |
|
|
|
|
|
April 6, 2020, 09:04
|
Slip Condition
|
#2 |
|
Senior Member
|
The slip condition in microchannels is not always valid. You have to determine if it is valid for your case or not. And there is hardly ever a full slip in a microchannel. For full slip, you can use free-slip condition available; specify shear stress of 0 at the wall. For partial slip, you have to use expression or UDF and you need to decide whether you want first-order or second-order slip model.
__________________
Regards, Vinerm PM to be used if and only if you do not want something to be shared publicly. PM is considered to be of the least priority. |
|
|
|
|
|
 |
| Tags |
| microchannels, slip b.c., slip condition, slip flow, slip wall |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Cyclic boundary condition in foam-extend 4.0 | rellumeister | OpenFOAM Pre-Processing | 2 | March 3, 2020 09:03 |
| Centrifugal fan | j0hnny | CFX | 13 | October 1, 2019 14:55 |
| Basic Nozzle-Expander Design | karmavatar | CFX | 20 | March 20, 2016 09:44 |
| Problem in setting Boundary Condition | Madhatter92 | CFX | 12 | January 12, 2016 05:39 |
| CFX fails to calculate a diffuser pipe flow | shenying0710 | CFX | 7 | March 26, 2013 05:13 |
Linear Mode
