How to extract velocity values in a specified plane

dbh0006 · September 18, 2019, 18:49

Hi everyone,

I ran a 3-D simulation of a wing with winglet. What I would like to do is be able to define a plane aft of the wing and then be able to read the v and w velocity values in this plane? Is there a way to do this using ANSYS Fluent?
So far all I've been able to do is plot the velocity contour on a specified plane but I would like to extract this data somehow so that I have the exact v and w velocity values in order to perform calculations with them.

Thanks in advance!

riccardo.frezza · September 19, 2019, 08:34

you can do that with the xyplot and selecting the "write to file" option

LuckyTran · September 20, 2019, 05:09

Several ways.

You can also define the surface. Then go to file=>write solution data and choose the surface and variables you want to export. Pick your favorite file format: ascii, etc.

September 18, 2019, 18:49	How to extract velocity values in a specified plane	#1
dbh0006 New Member Daniel H Join Date: Mar 2019 Posts: 5 Rep Power: 7	Hi everyone, I ran a 3-D simulation of a wing with winglet. What I would like to do is be able to define a plane aft of the wing and then be able to read the v and w velocity values in this plane? Is there a way to do this using ANSYS Fluent? So far all I've been able to do is plot the velocity contour on a specified plane but I would like to extract this data somehow so that I have the exact v and w velocity values in order to perform calculations with them. Thanks in advance!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[General] PDF of velocity values from a VTK file with some constraints	cfdaddicted	ParaView	0	October 21, 2017 06:51
velocity and cell coordinates on Threshold plane- Inflow Plane of virtual Disk	surajp92	STAR-CCM+	2	June 21, 2017 10:48
Extract 2D velocity values	zalho	FLUENT	9	June 2, 2017 06:23
Z velocity contour values differ from vectors	ghost82	FLUENT	0	October 7, 2012 05:23
how to check absolute velocity values	gaurav	FLUENT	7	May 17, 2004 18:07

September 19, 2019, 08:34		#2
riccardo.frezza New Member Riccardo Frezza Join Date: Dec 2018 Posts: 12 Rep Power: 8	you can do that with the xyplot and selecting the "write to file" option

September 20, 2019, 05:09		#3
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,762 Rep Power: 66	Several ways. You can also define the surface. Then go to file=>write solution data and choose the surface and variables you want to export. Pick your favorite file format: ascii, etc.