"Number Tracked" of particles in DPM solver

rmn_990 · September 13, 2019, 21:36

Hi,
I am doing a simulation with 11000 particles and I faced two problems with that:
1-

HTML Code:

Advancing DPM injections ....
number tracked = 11000, escaped = 0, aborted = 0, trapped = 0, evaporated = 0, incomplete = 0, incomplete_parallel = 0, splashed = 0

I dont know why after 17000 iterations or 10000 time steps, the number of tracked particles decreases.

2- After some particles attach a wall with "trap" boundary condition, Fluent will not show them anymore when I try to see them with "Particle Tracks".

It would be highly appreciated if someone can help me with these two problems.

Thanks in advance.

DnyanMiri · September 25, 2019, 06:53

Your first question is not clear to me and about second one
When you use 'Trap' DPM boundary condition it means when particle reaches to 'Trap' boundary, trajectory calculations are terminated for that particle so you cannot see its trajectories further

September 13, 2019, 21:36	"Number Tracked" of particles in DPM solver	#1
rmn_990 Member Ramin Join Date: Oct 2015 Posts: 33 Rep Power: 11	Hi, I am doing a simulation with 11000 particles and I faced two problems with that: 1- HTML Code: Advancing DPM injections .... number tracked = 11000, escaped = 0, aborted = 0, trapped = 0, evaporated = 0, incomplete = 0, incomplete_parallel = 0, splashed = 0 I dont know why after 17000 iterations or 10000 time steps, the number of tracked particles decreases. 2- After some particles attach a wall with "trap" boundary condition, Fluent will not show them anymore when I try to see them with "Particle Tracks". It would be highly appreciated if someone can help me with these two problems. Thanks in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEMFC model with FLUENT	brahimchoice	FLUENT	22	April 19, 2020 16:44
Injection of specific number of particles in DPM	DH	FLUENT	12	March 16, 2016 22:04
DPM for steady flow with unsteady particles tracking	yahya	FLUENT	0	March 28, 2013 14:28
Extracting pressure of particles in DPM	teymourj	FLUENT	0	June 1, 2010 15:37
Changing the acceleration of DPM particles??	Wikie	Fluent UDF and Scheme Programming	2	April 27, 2010 05:41

September 25, 2019, 06:53		#2
DnyanMiri Member Dnyanesh Mirikar Join Date: Jul 2019 Posts: 35 Rep Power: 7	Your first question is not clear to me and about second one When you use 'Trap' DPM boundary condition it means when particle reaches to 'Trap' boundary, trajectory calculations are terminated for that particle so you cannot see its trajectories further